List,
I'm trying to get 2005.1 onto this box I was just gifted. It's got a SuperMicro p4sct+ with a goofy SATA controller.
I've got four hard drives in it, connected to these four SATA connectors (labeled like 1/5, 2/6, 3/7, 4/8). I guess
i'm using them in 1,2,3,4 mode. But my gentoo cannot see the drives. lspci sees the controller
0000:00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub
(rev 02)
0000:00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA
Bridge (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02)
0000:00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev
02)
0000:00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt
Controller (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host
Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a)
0000:00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller
(rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller
(rev 02)
0000:00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller
(rev 02)
0000:00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
0000:01:01.0 Ethernet controller: Intel Corporation 82547GI Gigabit Ethernet
Controller
0000:02:04.0 RAID bus controller: Marvell Technology Group Ltd. MV88SX5041
4-port SATA I PCI-X Controller
0000:03:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:03:0a.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet
Controller
It's that dang Marvell thing, I think. When it boots it says Adaptec-HOSTRAID something. There are also two other SATA
connectors, seems that they connect to the Intel controller. Shouldn't ata_piix find it? Seems like it. What about a
Marvell driver for the four drives, am I hosed? Any ideas?
Relevant stuffs from dmesg
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
hdb: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
[ ... ]
libata version 1.11 loaded.
ata_piix version 1.03
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xE200 ctl 0xE302 bmdma 0xE600 irq 18
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE502 bmdma 0xE608 irq 18
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
--
gentoo-user@gentoo.org mailing list
