Hi,
After running an update yesterday (about 50 packages) on my ~x86 laptop, wicd
stopped working, and no wicd was not updated neither was any other network
related packages.
Today after a reboot my wireless network refused to start from wicd, starting
it manually works.
This is a part of the wicd.log:
2012/02/26 09:53:51 :: enctype is wpa
2012/02/26 09:53:51 :: Generating psk...
2012/02/26 09:53:51 :: ['/usr/bin/wpa_passphrase', 'DMJ',
'Do_not_care_about_this']
2012/02/26 09:53:51 :: Attempting to authenticate...
2012/02/26 09:53:51 :: ['wpa_supplicant', '-B', '-i', 'wlan0', '-c',
'/var/lib/wicd/configurations/000f90ac2780', '-D', dbus.String(u'wext',
variant_level=1)]
2012/02/26 09:53:51 :: ['iwconfig', 'wlan0', 'essid', '--', 'DMJ']
2012/02/26 09:53:51 :: iwconfig wlan0 channel 13
2012/02/26 09:53:51 :: iwconfig wlan0 ap 00:0F:90:AC:27:80
2012/02/26 09:53:51 :: WPA_CLI RESULT IS DISCONNECTED
2012/02/26 09:53:52 :: WPA_CLI RESULT IS COMPLETED
2012/02/26 09:53:52 :: Running DHCP with hostname mutgdjoda1
2012/02/26 09:53:52 :: /sbin/dhcpcd -h mutgdjoda1 --noipv4ll wlan0
2012/02/26 09:53:52 :: dhcpcd[12434]: sending commands to master dhcpcd process
2012/02/26 09:53:52 ::
2012/02/26 09:53:52 ::
2012/02/26 09:53:52 :: DHCP connection successful
2012/02/26 09:53:52 :: not verifying
2012/02/26 09:53:52 :: Connecting thread exiting.
2012/02/26 09:53:52 :: ifconfig wlan0
2012/02/26 09:53:52 :: IP Address is: None
2012/02/26 09:53:52 :: Sending connection attempt result success
2012/02/26 09:53:52 :: ifconfig eth0
2012/02/26 09:53:52 :: iwconfig wlan0
2012/02/26 09:53:52 :: Forced disconnect on
2012/02/26 09:53:52 :: /sbin/dhcpcd -k wlan0
Running the commands "by hand" everything works:
# wpa_supplicant -B -i wlan0 -c /var/lib/wicd/configurations/000f90ac2780 -D
wext
# wpa_cli status
Selected interface 'wlan0'
bssid=00:0f:90:ac:27:80
ssid=DMJ
id=0
mode=station
pairwise_cipher=TKIP
group_cipher=TKIP
key_mgmt=WPA-PSK
wpa_state=COMPLETED
ip_address=192.168.1.21
# /sbin/dhcpcd -h mutgdjoda1 --noipv4ll wlan0
dhcpcd[28962]: sending commands to master dhcpcd process
# ifconfig wlan0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet 192.168.1.21 netmask 255.255.255.0 broadcast 192.168.1.255
ether 00:18:de:e1:c9:71 txqueuelen 1000 (Ethernet)
RX packets 128 bytes 21081 (20.5 KiB)
RX errors 0 dropped 20 overruns 0 frame 0
TX packets 143 bytes 24546 (23.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
And my wireless connection works!
Anny suggestions what's wrong?
Regards,
--
Dan Johansson, <http://www.dmj.nu>
***************************************************
This message is printed on 100% recycled electrons!
***************************************************
