Am 11.04.2012 18:10, schrieb Silvio Siefke: > Hello, > > On Wed, 11 Apr 2012 06:53:22 +0200 > Florian Philipp <[email protected]> wrote: > >> It's a "Linux-VServer." In this setup, all virtual private servers share >> the kernel of the host system (It's like a glorified chroot). You don't >> need grub. The host system calls /sbin/init. I've followed this howto >> for hosting europe: >> http://log.pardus.de/2008/04/gentoo-on-1-vserver.html > > Yes this link i know, and u has problems or nothing?. I has run the setup, > but Gentoo want not start. Can u tell me how u make the Network. Because > i understand not the routing. > > root@vserver12:~# ip route > 127.0.0.0/8 dev lo scope link > default dev venet0 scope link >
This is my /etc/conf.d/net (of course you have to adapt subnets):
modules="iproute2"
modules="!ifconfig"
config_venet0="83.169.5.6/32 broadcast 0.0.0.0"
routes_venet0="191.255.255.1/32 scope link
default via 191.255.255.1"
dns_domain_lo="binarywings.net"
dns_domain_venet0="binarywings.net"
dns_servers="8.8.8.8"
/sbin/rc-update (notice net.venet0):
bootmisc | boot
devfs | sysinit
dmesg | sysinit
fcron | default
fsck | boot
hostname | boot
hwclock | boot
keymaps | boot
killprocs | shutdown
local | default
localmount | boot
modules | boot
mount-ro | shutdown
mtab | boot
net.lo | boot default
net.venet0 | default
netmount | default
nscd | default
procfs | boot
root | boot
savecache | shutdown
sshd | default
svscan | default
swap | boot
sysctl | boot
syslog-ng | default
termencoding | boot
urandom | boot
>
> And must use the vserver build? Because its from year 2006 when i see it
> right,
> can i use it at this timepoint?
>
IIRC, the build was merged into the main tree. You should be able to use
the default stage3. I'm using the default x86 portage profile.
It's probably also a good idea to set rc_sys in /etc/rc.conf but I
didn't need to.
signature.asc
Description: OpenPGP digital signature
