walt writes:
> Now it's hotter than Hades here and I'm very much aware of
> the fan noise, but I can't tell if the fan is beginning
> to fail (the noise sounds a bit harsh to me) or something
> is merely controlling the speed appropriately.
>
> The machines BIOS has no settings whatever concerning the
> fan or temperature warnings, etc. so I have no idea how
> to find out the CPU temp.
Strange.
> The k10temp kernel module loads automatically at boot with
> no errors, so I just hope something (somewhere) is taking
> care of this stuff automatically. But I'm only hoping,
> not knowing.
>
> Any ideas how to find out for sure?
emerge sys-apps/lm_sensors, run 'sensors-detect', and hopefully the
'sensors' command will show you the fan speeds and temperatures then. And
maybe the output makes sense. Here it does that only partially, this is
what it looks like:
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +9.9°C (high = +70.0°C)
(crit = +70.0°C, hyst = +67.0°C)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 86.04 W (crit = 95.04 W)
nct6775-isa-0290
Adapter: ISA adapter
Vcore: +0.93 V (min = +0.00 V, max = +1.74 V)
in1: +1.66 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.30 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: +3.30 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +0.06 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +1.86 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +0.06 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.42 V (min = +0.00 V, max = +0.00 V) ALARM
Vbat: +3.50 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 1155 RPM (min = 0 RPM, div = 8) ALARM
fan2: 1054 RPM (min = 0 RPM, div = 128) ALARM
fan3: 540 RPM (min = 0 RPM, div = 64) ALARM
fan4: 0 RPM (div = 128)
SYSTIN: +37.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor =
thermistor
CPUTIN: +37.0°C (high = +80.0°C, hyst = +75.0°C) sensor =
thermistor
AUXTIN: +127.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor =
thermistor
cpu0_vid: +0.000 V
intrusion0: ALARM
Wonko
