I was doing a system upgrade. Following the instructions from http://www.gentoo.org/doc/en/handbook/handbook-amd64.xml?part=2&chap=1
emerge --sync emerge --update --deep world So after that, everything was updated except build dependencies and packages that had a use flag change on them, so I believe building one of the build dependencies failed causing all the problems I am having. I did: emerge --update --deep --with-bdeps=y --newuse world So I would often get the message configure: error: C compiler cannot create executables See `config.log' for more details So, what I did is get another gcc compiler as a bin package, and set it as my default with gcc-config. I then tried to rebuild libtool. Again, I got the same message (in the bold part): bullshark@beastlinux ~ % sudo emerge -av --oneshot libtool Password: * IMPORTANT: 3 news items need reading for repository 'gentoo'. * Use eselect news to read news items. These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] sys-devel/libtool-2.4-r1 USE="-test -vanilla*" 0 kB Total: 1 package (1 reinstall), Size of downloads: 0 kB Would you like to merge these packages? [Yes/No] y >>> Verifying ebuild manifests >>> Emerging (1 of 1) sys-devel/libtool-2.4-r1 * libtool-2.4.tar.xz RMD160 SHA1 SHA256 size ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking ./libtool-2.4.tar to >>> /var/tmp/portage/sys-devel/libtool-2.4-r1/work >>> Source unpacked in /var/tmp/portage/sys-devel/libtool-2.4-r1/work >>> Preparing source in >>> /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4 ... * Applying libtool-1.5.20-use-linux-version-in-fbsd.patch ... [ ok ] * Running eautoreconf in '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl' ... * Running true --install --copy --force --automake ... [ ok ] * Running aclocal -I m4 ... [ ok ] * Running autoconf ... [ ok ] * Running autoheader ... [ ok ] * Running automake --add-missing --copy --foreign ... [ ok ] * Running eautoreconf in '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4' ... * Running true --install --copy --force --automake ... [ ok ] * Running aclocal -I libltdl/m4 ... [ ok ] * Running autoconf ... [ ok ] * Running autoheader ... [ ok ] * Running automake --add-missing --copy ... [ ok ] >>> Source prepared. >>> Configuring source in >>> /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4 ... * econf: updating libtool-2.4/libltdl/config/config.sub with /usr/share/gnuconfig/config.sub * econf: updating libtool-2.4/libltdl/config/config.guess with /usr/share/gnuconfig/config.guess ./configure --prefix=/usr --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --dat adir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib ## ----------------------- ## ## Configuring libtool 2.4 ## ## ----------------------- ## checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu configure: autobuild project... GNU Libtool configure: autobuild revision... 2.4 () configure: autobuild hostname... beastlinux configure: autobuild mode... default configure: autobuild timestamp... 20120715T164750Z checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc [b]checking whether the C compiler works... no configure: error: in `/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4': configure: error: C compiler cannot create executables See `config.log' for more details[/b] !!! Please attach the following file when seeking support: !!! /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/config.log * ERROR: sys-devel/libtool-2.4-r1 failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 85: Called src_configure * environment, line 2807: Called default * phase-functions.sh, line 798: Called _eapi2_src_configure * phase-helpers.sh, line 567: Called econf * phase-helpers.sh, line 467: Called die * The specific snippet of code: * die "econf failed" * * If you need support, post the output of `emerge --info '=sys-devel/libtool-2.4-r1'`, * the complete build log and the output of `emerge -pqv '=sys-devel/libtool-2.4-r1'`. /usr/lib/portage/bin/isolated-functions.sh: line 214: wait: `econf failed': not a pid or valid job spec * The complete build log is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/environment'. * Working directory: '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4' * S: '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4' >>> Failed to emerge sys-devel/libtool-2.4-r1, Log file: >>> '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/build.log' * Messages for package sys-devel/libtool-2.4-r1: * ERROR: sys-devel/libtool-2.4-r1 failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 85: Called src_configure * environment, line 2807: Called default * phase-functions.sh, line 798: Called _eapi2_src_configure * phase-helpers.sh, line 567: Called econf * phase-helpers.sh, line 467: Called die * The specific snippet of code: * die "econf failed" * * If you need support, post the output of `emerge --info '=sys-devel/libtool-2.4-r1'`, * the complete build log and the output of `emerge -pqv '=sys-devel/libtool-2.4-r1'`. * The complete build log is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/sys-devel/libtool-2.4-r1/temp/environment'. * Working directory: '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4' * S: '/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4 Here's the build.log: This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by GNU Libtool configure 2.4, which was generated by GNU Autoconf 2.68. Invocation command line was $ ./configure --prefix=/usr --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib ## --------- ## ## Platform. ## ## --------- ## hostname = beastlinux uname -m = i686 uname -r = 3.2.12-gentoo-laptop uname -s = Linux uname -v = #5 Mon Jul 9 22:45:24 CDT 2012 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/lib/portage/bin/ebuild-helpers PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /opt/bin PATH: /usr/i686-pc-linux-gnu/gcc-bin/4.5.3 ## ----------- ## ## Core tests. ## ## ----------- ## configure:2703: checking for a BSD-compatible install configure:2771: result: /usr/bin/install -c configure:2782: checking whether build environment is sane configure:2832: result: yes configure:2973: checking for a thread-safe mkdir -p configure:3012: result: /bin/mkdir -p configure:3025: checking for gawk configure:3041: found /usr/bin/gawk configure:3052: result: gawk configure:3063: checking whether make sets $(MAKE) configure:3085: result: yes configure:3179: checking build system type configure:3193: result: i686-pc-linux-gnu configure:3213: checking host system type configure:3226: result: i686-pc-linux-gnu configure:3253: autobuild project... GNU Libtool configure:3259: autobuild revision... 2.4 () configure:3264: autobuild hostname... beastlinux configure:3268: autobuild mode... default configure:3276: autobuild timestamp... 20120715T164750Z configure:3335: checking for i686-pc-linux-gnu-gcc configure:3351: found /usr/bin/i686-pc-linux-gnu-gcc configure:3362: result: i686-pc-linux-gnu-gcc configure:3631: checking for C compiler version configure:3640: i686-pc-linux-gnu-gcc --version >&5 i686-pc-linux-gnu-gcc (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) 4.5.3 Copyright (C) 2010 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3651: $? = 0 configure:3640: i686-pc-linux-gnu-gcc -v >&5 Using built-in specs. COLLECT_GCC=/usr/i686-pc-linux-gnu/gcc-bin/4.5.3/i686-pc-linux-gnu-gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/i686-pc-linux-gnu/4.5.3/lto-wrapper Target: i686-pc-linux-gnu Configured with: /var/tmp/portage/sys-devel/gcc-4.5.3-r2/work/gcc-4.5.3/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/4.5.3 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/4.5.3/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/4.5.3 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/4.5.3/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/4.5.3/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/4.5.3/include/g++-v4 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --disable-fixed-point --without-ppl --without-cloog --disable-lto --disable-nls --with-system-zlib --disable-werror --enable-secureplt --disable-multilib --enable-libmudflap --disable-libssp --enable-libgomp --with-python-dir=/share/gcc-data/i686-pc-linux-gnu/4.5.3/python --enable-checking=release --disable-libgcj --with-arch=i686 --enable-languages=c,c++,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-targets=all --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.5.3-r2 p1.1, pie-0.4.7' Thread model: posix gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) configure:3651: $? = 0 configure:3640: i686-pc-linux-gnu-gcc -V >&5 i686-pc-linux-gnu-gcc: '-V' option must have argument configure:3651: $? = 1 configure:3640: i686-pc-linux-gnu-gcc -qversion >&5 i686-pc-linux-gnu-gcc: unrecognized option '-qversion' i686-pc-linux-gnu-gcc: no input files configure:3651: $? = 1 configure:3671: checking whether the C compiler works configure:3693: i686-pc-linux-gnu-gcc -O2 -march=pentium3 -pipe -fomit-frame-pointer -msse -mmmx -Wl,-O1 -Wl,--as-needed conftest.c >&5 /usr/lib/gcc/i686-pc-linux-gnu/4.5.3/../../../../i686-pc-linux-gnu/bin/as: symbol lookup error: /usr/lib/binutils/i686-pc-linux-gnu/2.21.1/libopcodes-2.21.1.so: undefined symbol: buffer_read_memory configure:3697: $? = 2 configure:3735: result: no configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU Libtool" | #define PACKAGE_TARNAME "libtool" | #define PACKAGE_VERSION "2.4" | #define PACKAGE_STRING "GNU Libtool 2.4" | #define PACKAGE_BUGREPORT "[email protected]" | #define PACKAGE_URL "http://www.gnu.org/software/libtool/"; | #define PACKAGE "libtool" | #define VERSION "2.4" | /* end confdefs.h. */ | | int | main () | { | | ; | return 0; | } configure:3740: error: in `/var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4': configure:3742: error: C compiler cannot create executables See `config.log' for more details ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=i686-pc-linux-gnu ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-O2 -march=pentium3 -pipe -fomit-frame-pointer -msse -mmmx' ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value='-O2 -march=pentium3 -pipe -fomit-frame-pointer -msse -mmmx' ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_F77_set= ac_cv_env_F77_value= ac_cv_env_FCFLAGS_set=set ac_cv_env_FCFLAGS_value='-march=i686 -O2 -pipe' ac_cv_env_FC_set= ac_cv_env_FC_value= ac_cv_env_FFLAGS_set=set ac_cv_env_FFLAGS_value='-march=i686 -O2 -pipe' ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value='-Wl,-O1 -Wl,--as-needed' ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=i686-pc-linux-gnu ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=i686-pc-linux-gnu ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_host=i686-pc-linux-gnu ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=gawk ac_cv_prog_CC=i686-pc-linux-gnu-gcc ac_cv_prog_make_make_set=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl/config/missing --run aclocal-1.11' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='' AMTAR='${SHELL} /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl/config/missing --run tar' AR='' ARGZ_H='' AS='' AUTOCONF='${SHELL} /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl/config/missing --run autoconf' AUTOHEADER='${SHELL} /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl/config/missing --run autoheader' AUTOM4TE='autom4te' AUTOMAKE='${SHELL} /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl/config/missing --run automake-1.11' AUTOTEST='$(AUTOM4TE) --language=autotest' AWK='gawk' CC='i686-pc-linux-gnu-gcc' CCDEPMODE='' CFLAGS='-O2 -march=pentium3 -pipe -fomit-frame-pointer -msse -mmmx' CONFIG_STATUS_DEPENDENCIES='$(top_srcdir)/ChangeLog' CONF_SUBDIRS='tests/cdemo tests/demo tests/depdemo tests/f77demo tests/fcdemo tests/mdemo tests/mdemo2 tests/pdemo tests/tagdemo' CONVENIENCE_LTDL_FALSE='' CONVENIENCE_LTDL_TRUE='' CPP='' CPPFLAGS='' CXX='' CXXCPP='' CXXDEPMODE='' CXXFLAGS='-O2 -march=pentium3 -pipe -fomit-frame-pointer -msse -mmmx' CYGPATH_W='echo' DEFS='' DEPDIR='' DIST_MAKEFILE_LIST='tests/cdemo/Makefile tests/demo/Makefile tests/depdemo/Makefile tests/f77demo/Makefile tests/fcdemo/Makefile tests/mdemo/Makefile tests/mdemo2/Makefile tests/pdemo/Makefile tests/tagdemo/Makefile ' DLLTOOL='' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='' EXEEXT='' F77='' FC='' FCFLAGS='-march=i686 -O2 -pipe' FFLAGS='-march=i686 -O2 -pipe' FGREP='' GCJ='' GCJFLAGS='' GREP='' HAVE_CXX_FALSE='' HAVE_CXX_TRUE='' HAVE_F77_FALSE='' HAVE_F77_TRUE='' HAVE_FC_FALSE='' HAVE_FC_TRUE='' HAVE_GCJ_FALSE='' HAVE_GCJ_TRUE='' HAVE_RC_FALSE='' HAVE_RC_TRUE='' HELP2MAN='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_LTDL_FALSE='' INSTALL_LTDL_TRUE='' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LASTRELEASE='' LD='' LDFLAGS='-Wl,-O1 -Wl,--as-needed' LIBADD_DL='' LIBADD_DLD_LINK='' LIBADD_DLOPEN='' LIBADD_SHL_LOAD='' LIBOBJS='' LIBS='' LIBTOOL='' LIPO='' LN_S='' LTDLOPEN='' LTLIBOBJS='' LT_CONFIG_H='' LT_DLLOADERS='' LT_DLPREOPEN='' M4SH='$(AUTOM4TE) --language=m4sh' MAKEINFO='${SHELL} /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl/config/missing --run makeinfo' MANIFEST_TOOL='' MKDIR_P='/bin/mkdir -p' NM='' NMEDIT='' OBJDUMP='' OBJEXT='' ORDER='' OTOOL64='' OTOOL='' PACKAGE='libtool' PACKAGE_BUGREPORT='[email protected]' PACKAGE_NAME='GNU Libtool' PACKAGE_STRING='GNU Libtool 2.4' PACKAGE_TARNAME='libtool' PACKAGE_URL='http://www.gnu.org/software/libtool/' PACKAGE_VERSION='2.4' PATH_SEPARATOR=':' RANLIB='' RC='' SED='' SET_MAKE='' SHELL='/bin/bash' STRIP='' TIMESTAMP='' VERSION='2.4' ac_ct_AR='' ac_ct_CC='' ac_ct_CXX='' ac_ct_DUMPBIN='' ac_ct_F77='' ac_ct_FC='' aclocaldir='${datadir}/aclocal' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='' am__fastdepCXX_TRUE='' am__include='' am__isrc='' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build='i686-pc-linux-gnu' build_alias='i686-pc-linux-gnu' build_cpu='i686' build_os='linux-gnu' build_vendor='pc' datadir='/usr/share' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host='i686-pc-linux-gnu' host_alias='i686-pc-linux-gnu' host_cpu='i686' host_os='linux-gnu' host_vendor='pc' htmldir='${docdir}' includedir='${prefix}/include' infodir='/usr/share/info' install_sh='${SHELL} /var/tmp/portage/sys-devel/libtool-2.4-r1/work/libtool-2.4/libltdl/config/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/var/lib' mandir='/usr/share/man' mkdir_p='/bin/mkdir -p' oldincludedir='/usr/include' package_revision='1.3293' pdfdir='${docdir}' pkgdatadir='${datadir}/libtool' prefix='/usr' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sys_symbol_underscore='' sysconfdir='/etc' target_alias='' to_host_file_cmd='' to_tool_file_cmd='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "GNU Libtool" #define PACKAGE_TARNAME "libtool" #define PACKAGE_VERSION "2.4" #define PACKAGE_STRING "GNU Libtool 2.4" #define PACKAGE_BUGREPORT "[email protected]" #define PACKAGE_URL "http://www.gnu.org/software/libtool/"; #define PACKAGE "libtool" #define VERSION "2.4" configure: exit 77 And emerge --info Portage 2.1.10.65 (hardened/linux/x86, gcc-4.5.3, glibc-2.14.1-r3, 3.2.12-gentoo-laptop i686) ================================================================= System uname: Linux-3.2.12-gentoo-laptop-i686-with-gentoo-2.1 Timestamp of tree: Sun, 15 Jul 2012 09:15:01 +0000 distcc 3.1 i686-pc-linux-gnu [disabled] app-shells/bash: 4.2_p20 dev-lang/python: 2.7.3-r2, 3.2.3 dev-util/cmake: 2.8.7-r5 dev-util/pkgconfig: 0.26 sys-apps/baselayout: 2.1-r1 sys-apps/openrc: 0.9.8.4 sys-apps/sandbox: 2.5 sys-devel/autoconf: 2.68 sys-devel/automake: 1.11.1 sys-devel/binutils: 2.21.1-r1 sys-devel/gcc: 4.5.3-r2, 4.6.2 sys-devel/gcc-config: 1.6 sys-devel/libtool: 2.4-r1 sys-devel/make: 3.82-r1 sys-kernel/linux-headers: 3.1 (virtual/os-headers) sys-libs/glibc: 2.14.1-r3 Repositories: gentoo ACCEPT_KEYWORDS="x86" ACCEPT_LICENSE="* -@EULA" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -march=pentium3 -pipe -fomit-frame-pointer -msse -mmmx" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-O2 -march=pentium3 -pipe -fomit-frame-pointer -msse -mmmx" DISTDIR="/usr/portage/distfiles" FCFLAGS="-march=i686 -O2 -pipe" FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles news parallel-fetch parse-eapi-ebuild-head protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch xattr" FFLAGS="-march=i686 -O2 -pipe" GENTOO_MIRRORS="http://mirror.usu.edu/mirrors/gentoo/ http://mirror.datapipe.net/gentoo"; LANG="en_US.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" LINGUAS="en en_GB en_US" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="" SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage" USE="256-color X acl alsa bash-completion berkdb branding bzip2 cdr cli cpudetection cracklib crypt cxx dbus dga dri dvd exif fbcon flac gdbm gif gnutls gpm gstreamer gtk gzip hardened iconv ipv6 jabber jit joystick jpeg keyboard lcms libnotify lzma matroska mmx modules mouse mp3 mp4 mpeg mudflap multiuser ncurses nls nptl nsplugin offensive ogg opengl openmp pam pax_kernel pcre pic png posix pppd pulseaudio qt4 readline sasl session socks5 sox spell sse ssl symlink syslog tcpd tiff truetype udev unicode unicode3 urandom usb v4l vim-syntax vorbis wifi win32codecs x264 x86 xattr xcomposite xft xmpp xorg xscreensaver xvid zlib zsh-completion" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev synaptics keyboard mouse joystick" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="en en_GB en_US" PHP_TARGETS="php5-3" PYTHON_TARGETS="python3_2 python2_7" RUBY_TARGETS="ruby18 ruby19" USERLAND="GNU" VIDEO_CARDS="r128" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON Making a simple Hello World and attempting to compile: bullshark@beastlinux ~ % cat hello.c #include <stdio.h> main() { printf("Hello Working GCC\n."); } bullshark@beastlinux ~ % gcc hello.c -o hello /usr/lib/gcc/i686-pc-linux-gnu/4.5.3/../../../../i686-pc-linux-gnu/bin/as: symbol lookup error: /usr/lib/binutils/i686-pc-linux-gnu/2.21.1/libopcodes-2.21.1.so: undefined symbol: buffer_read_memory bullshark@beastlinux ~ % Christopher Lemire <[email protected]> Ubuntu 64 bit Linux Raid Level 0 Gnu Privacy Guard Key Fingerprint = 3E1A 9103 EF3D 4885 6866 E9DE C69F 18B3 E13B 0909 Web: http://linuxinnovations.blogspot.com Jabber: [email protected]
