From the elog which I applied carefully and the links to Flameeyes blog kindly shared in this M/L, I thought that I would have to rename *all* my interfaces.
Therefore I was surprised to find that only my eth0 changed to enp11s0, while
my wlan0 stayed the same. I even rebooted to make sure and had no problem
connecting wirelessly.
Is this how it is supposed to be?
$ ifconfig -a
enp11s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1492
inet 10.10.10.7 netmask 255.255.255.0 broadcast 10.10.10.255
inet6 fe80::226:b9ff:fe20:b49c prefixlen 64 scopeid 0x20<link>
ether 00:26:b9:20:b4:9c txqueuelen 1000 (Ethernet)
RX packets 666638 bytes 946921086 (903.0 MiB)
RX errors 0 dropped 132 overruns 0 frame 0
TX packets 346579 bytes 26003941 (24.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
ip6tnl0: flags=128<NOARP> mtu 1452
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 0
(UNSPEC)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ip_vti0: flags=128<NOARP> mtu 1500
tunnel txqueuelen 0 (IPIP Tunnel)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 789896 bytes 914674121 (872.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 789896 bytes 914674121 (872.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
sit0: flags=128<NOARP> mtu 1480
sit txqueuelen 0 (IPv6-in-IPv4)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 70:1a:04:d7:c3:09 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
--
Regards,
Mick
signature.asc
Description: This is a digitally signed message part.
