Am 12.09.2013 20:23, schrieb Canek Peláez Valdés:
> Stefan, what initramfs are you using?
dracut, run via your kerninst-script.
> Could you please explain how is exactly your layout? From drives to
> partitions to PVs, VGs and LVs? And throw in there also the LUKS and
> RAID (if used) setup. I will try to replicate that in a VM. Next week,
> since we have a holiday weekend coming.
thanks for your offer.
I wil happily list my setup BUT let me tell at first that the latest
sys-fs/lvm2-2.02.100 seems to have fixed that semaphore-issue.
After booting my desktop with it I quickly tested:
# lvcreate -n test -L1G VG03
Logical volume "test" created
#
fine!
Three times ok ...
But I still face the fact that the LVs weren't activated at boot time.
Manual "vgchange -ay" needed ... or that self-written lvm.service
enabled as mentioned somewhat earlier.
Here my setup:
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 2M 0 part
├─sda2 8:2 0 2G 0 part [SWAP]
├─sda3 8:3 0 600G 0 part
│ └─md127 9:127 0 595,1G 0 raid1
│ ├─VG03-music 253:0 0 190G 0 lvm /mnt/music
│ ├─VG03-platz 253:1 0 200G 0 lvm /mnt/platz
│ ├─VG03-media 253:2 0 45G 0 lvm /mnt/media
│ ├─VG03-home 253:3 0 30G 0 lvm
│ ├─VG03-oopsfiles 253:4 0 12G 0 lvm /mnt/oopsfiles
│ ├─VG03-dropbox 253:5 0 5G 0 lvm /mnt/dropbox
│ ├─VG03-distfiles 253:6 0 10G 0 lvm /usr/portage/distfiles
│ ├─VG03-gentoo32 253:7 0 15G 0 lvm /mnt/gentoo32
│ ├─VG03-xp 253:8 0 40G 0 lvm
│ └─VG03-test 253:9 0 1G 0 lvm
└─sda6 8:6 0 50G 0 part
└─md4 9:4 0 50G 0 raid1
sdb 8:16 0 931,5G 0 disk
├─sdb1 8:17 0 100M 0 part
├─sdb2 8:18 0 98,8G 0 part
├─sdb3 8:19 0 50G 0 part
│ └─md4 9:4 0 50G 0 raid1
├─sdb4 8:20 0 12,4G 0 part
└─sdb6 8:22 0 595,1G 0 part
└─md127 9:127 0 595,1G 0 raid1
├─VG03-music 253:0 0 190G 0 lvm /mnt/music
├─VG03-platz 253:1 0 200G 0 lvm /mnt/platz
├─VG03-media 253:2 0 45G 0 lvm /mnt/media
├─VG03-home 253:3 0 30G 0 lvm
├─VG03-oopsfiles 253:4 0 12G 0 lvm /mnt/oopsfiles
├─VG03-dropbox 253:5 0 5G 0 lvm /mnt/dropbox
├─VG03-distfiles 253:6 0 10G 0 lvm /usr/portage/distfiles
├─VG03-gentoo32 253:7 0 15G 0 lvm /mnt/gentoo32
├─VG03-xp 253:8 0 40G 0 lvm
└─VG03-test 253:9 0 1G 0 lvm
sdc 8:32 0 55,9G 0 disk
├─sdc1 8:33 0 25G 0 part /
├─sdc2 8:34 0 2G 0 part
└─sdc3 8:35 0 28,9G 0 part /home
sr0 11:0 1 1024M 0 rom
This pretty much says it all, right?
2 hdds sda and sdb
1 ssd sdc
root-fs and /home on ssd ...
sda and sdb build two RAID-arrays (rather ugly names and partitions ...
grown over time):
# cat /proc/mdstat
Personalities : [raid1]
md4 : active raid1 sdb3[0] sda6[2]
52395904 blocks super 1.2 [2/2] [UU]
md127 : active raid1 sdb6[0] sda3[1]
623963072 blocks [2/2] [UU]
unused devices: <none>
# pvs
PV VG Fmt Attr PSize PFree
/dev/md127 VG03 lvm2 a-- 595,05g 47,05g
--- thanks in advance, Stefan
