On Tue, Oct 08, 2013 at 08:19:40PM +0300, Alexander Kapshuk wrote: > > I just plugged in my USB memory stick. Here's the output of dmesg with > regard to that: > box0=; dmesg|tail -30 > [ 1674.204287] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 > ACK POWER sig=se0 PE CONNECT > [ 1674.255067] usb 1-3: new high-speed USB device number 3 using ehci-pci > [ 1674.306278] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled > [ 1674.306286] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 > ACK POWER sig=se0 PE CONNECT > [ 1674.370434] usb 1-3: default language 0x0409 > [ 1674.371812] usb 1-3: udev 3, busnum 1, minor = 2 > [ 1674.371816] usb 1-3: New USB device found, idVendor=0951, idProduct=1603 > [ 1674.371819] usb 1-3: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 1674.371821] usb 1-3: Product: DataTraveler 2.0 > [ 1674.371824] usb 1-3: Manufacturer: Kingston > [ 1674.371826] usb 1-3: SerialNumber: 000AEB91BC8CA9203550013A > [ 1674.371945] usb 1-3: usb_probe_device > [ 1674.371949] usb 1-3: configuration #1 chosen from 1 choice > [ 1674.372446] usb 1-3: adding 1-3:1.0 (config #1, interface 0) > [ 1674.372501] usb-storage 1-3:1.0: usb_probe_interface > [ 1674.372508] usb-storage 1-3:1.0: usb_probe_interface - got id > [ 1674.372511] usb-storage 1-3:1.0: USB Mass Storage device detected > [ 1674.372679] scsi6 : usb-storage 1-3:1.0 > [ 1675.374695] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 > 1.00 PQ: 0 ANSI: 2 > [ 1675.377095] sd 6:0:0:0: [sdb] 7852032 512-byte logical blocks: (4.02 > GB/3.74 GiB) > [ 1675.377860] sd 6:0:0:0: [sdb] Write Protect is off > [ 1675.377866] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 > [ 1675.378706] sd 6:0:0:0: [sdb] No Caching mode page present > [ 1675.378711] sd 6:0:0:0: [sdb] Assuming drive cache: write through > [ 1675.382693] sd 6:0:0:0: [sdb] No Caching mode page present > [ 1675.382698] sd 6:0:0:0: [sdb] Assuming drive cache: write through > [ 1675.608825] sdb: > [ 1675.996321] sd 6:0:0:0: [sdb] No Caching mode page present > [ 1675.996326] sd 6:0:0:0: [sdb] Assuming drive cache: write through > [ 1675.996330] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Additionally, there doesn't seem to be any partitions on that device. Is this some type of filesystem/label which does not have one? Such as sdb1 -- Happy Penguin Computers >') 126 Fenco Drive ( \ Tupelo, MS 38801 ^^ supp...@happypenguincomputers.com 662-269-2706 662-205-6424 http://happypenguincomputers.com/ A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail? Don't top-post: http://en.wikipedia.org/wiki/Top_post#Top-posting
