On Sunday 04 May 2014 20:52:13 J. Roeleveld wrote:
> On Tuesday, April 29, 2014 01:47:08 AM Peter Humphrey wrote:
> I thought the man-page for badblocks (it's a seperate utility) actually says
> it should be run on the physical disks?

Could well do so - I stopped reading when I came to this:

"... it  is  strongly  recommended  that  users not run badblocks directly, 
but rather use the -c option of the e2fsck and mke2fs programs."

:-)

> > On Monday 28 Apr 2014 13:32:05 I wrote:

> > Perhaps I should find a different slot for the Quadro FX580
> > card, to separate it from the usb interface.
> 
> Always a good idea, if possible.
> USB and Video are both heavily used items.

Yes, you're right. I'll see what I can arrange. It must be time to get the 
duster out too. Also, this morning I see this in dmesg:

[66770.347672] nouveau E[   PFIFO][0000:01:00.0] DMA_PUSHER - ch 4 
[kwin[6587]] get 0x002007524c put 0x0020075704 ib_get 0x00000068 ib_put 
0x00000072 state 0x8000753c (err: INVALID_CMD) push 0x00406040
[66770.347697] nouveau E[   PFIFO][0000:01:00.0] DMA_PUSHER - ch 4 
[kwin[6587]] get 0x002037c000 put 0x002037c054 ib_get 0x00000069 ib_put 
0x00000073 state 0x80000000 (err: INVALID_CMD) push 0x00406040

> USB-mouse, keyboard,harddrive,flash-stick,.... ?
> Eg. anything plugged into USB can cause interrupts.

No USB mouse or keyboard here; still using PS/2. I usually have a memory stick 
plugged in but I removed it during the investigation. The external USB disk 
will have been powered up for some of the time.

> Also, some mainboards have additional items pre-connected to the USB-bus.

Time to stick my head into the nVidia docs...

-- 
Regards
Peter


Reply via email to