On Tuesday, November 18, 2014 09:00:37 PM thegeezer wrote: > On 18/11/14 18:27, meino.cra...@gmx.de wrote: > > How can I configure Gentoo on the Arietta board > > to use ethernet-over-usb to be started while > > booting the Arietta board? > > > > By "replace everything eth0 with usb0" ??? ;) > > if you still have emdebian image you can boot that and see which modules > are loaded - that would be a start. a nice dodge is > # find /sys | grep drivers > you can also check everything in "make menuconfig" under the section > device drivers\network device support\usb network adaptors > that everything you _might_ need is selected > there is a chance that the gentoo image has what you need --- what does > "lsusb" show you ? what about "ifconfig -a" > usb ethernet devices have very odd names ... names such as enp0s29u1u2 > so it would be "replace everything eth0 with enp0s29u1u2"
Meino, You might also want to check if there is any firmware that is not being found/loaded. For me, that is usually the case when something isn't working. -- Joost
