Am Montag, 15.12.2014 um 20:02 schrieb Joseph <syscon...@gmail.com>: > On 12/16/14 01:37, waben...@gmail.com wrote: > >Am Sonntag, 14.12.2014 um 22:37 > >schrieb Joseph <syscon...@gmail.com>: > > > >> I have a USB stick with FAT32 file system, but when I insert the > >> disk it is not mounting on my desktop. No icon is showing up, why? > > > >Here comes the the magic formula, IIRC ;) > > > >Your user has to be in group plugdev. > > Done. > > >udisks USE flag for xfce-base/thunar must be set. > > Yes, it was. > > >The USB-device may NOT have a config line in /etc/fstab. > > Correct, done. > > >To enable/disable automounting look at thunars menu: > >edit -> settings -> advanced-settings -> volume-management (checkbox) > > Yes, it is/was enabled. > > When I insert USB stick formatted as FAT or ext3/4 the icon > automatically appears on my desktop. When I insert USB stick
Is this the same stick? > formatted as FAT32, nothing happens. That is what is puzzling me. > That's strange. Can you mount the stick by hand? When I insert a FAT32 Stick the following message appears in dmesg (note that the order and content differs from your dmesg, but I don't know if this is important:) [49627.224307] usb 1-5: new high-speed USB device number 4 using ehci-pci [49627.349351] usb 1-5: New USB device found, idVendor=1307, idProduct=0165 [49627.349361] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [49627.349368] usb 1-5: Product: USB Mass Storage Device [49627.349373] usb 1-5: Manufacturer: USBest Technology [49627.349378] usb 1-5: SerialNumber: 080920097d039b [49627.349797] usb-storage 1-5:1.0: USB Mass Storage device detected [49627.350022] scsi19 : usb-storage 1-5:1.0 [49628.352252] scsi 19:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2 [49628.352829] sd 19:0:0:0: Attached scsi generic sg11 type 0 [49628.354004] sd 19:0:0:0: [sdj] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB) [49628.354610] sd 19:0:0:0: [sdj] Write Protect is off [49628.354618] sd 19:0:0:0: [sdj] Mode Sense: 00 00 00 00 [49628.355238] sd 19:0:0:0: [sdj] Asking for cache data failed [49628.355244] sd 19:0:0:0: [sdj] Assuming drive cache: write through [49628.484320] sdj: sdj1 [49628.487921] sd 19:0:0:0: [sdj] Attached SCSI removable disk Command "p" in fdisk shows: Disk /dev/sdj: 1,9 GiB, 2021654528 bytes, 3948544 sectors Units: Sektoren of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x000d4153 Gerät Boot Start Ende Blocks Id System /dev/sdj1 * 63 3948543 1974240+ c W95 FAT32 (LBA) Do you also have the FS-Id set to "c"? Regards wabe
