This is what I see when I plugged in two memory modules:
=======================================================
*-memory
description: System Memory
physical id: 2f
slot: System board or motherboard
size: 16GiB
*-bank:0
description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
product: Array1_PartNumber1
vendor: A1_Manufacturer1
physical id: 0
serial: A1_SerNum1
slot: DIMM_A1
size: 8GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-bank:1
description: [empty]
product: Array1_PartNumber0
vendor: A1_Manufacturer0
physical id: 1
serial: A1_SerNum0
slot: DIMM_A2
*-bank:2
description: DIMM DDR3 Synchronous 1333 MHz (0.8 ns)
product: F3-2133C9-8GXH
vendor: Undefined
physical id: 2
serial: 00000000
slot: DIMM_B1
size: 8GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-bank:3
description: [empty]
product: Array1_PartNumber3
vendor: A1_Manufacturer3
physical id: 3
serial: A1_SerNum3
slot: DIMM_B2
========================================These were bought as a set from Amazon: http://www.amazon.co.uk/Ripjaws-PC17000-2133MHz-Memory-Platforms/dp/B007COT274/ but as you can see above only the second module reports a product code (product: F3-2133C9-8GXH), while the first module shows "Array1_PartNumber1". Is this normal? Is there something wrong with the memory module(s), the MoBo, or even the lshw command? -- Regards, Mick
signature.asc
Description: This is a digitally signed message part.
