On 9/23/05, Dave Nebinger <[EMAIL PROTECTED]> wrote:
> > you don't have rpcinfo? that is not right!
>
> > >
> > > dragonfly ~ # rcpinfo -p
> > > -bash: rcpinfo: command not found
> > > dragonfly ~ # slocate rcpinfo
> > > dragonfly ~ #
>
> Hold on guys, notice the spelling difference - rpcinfo which is what you
> need, but rcpinfo is what was searched for.
>
My bad eyes. Thanks for seeing that Dave!
OK, on the Myth backend client side:
dragonfly ~ # rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100024 1 tcp 32769 status
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 udp 32770 nlockmgr
100021 3 udp 32770 nlockmgr
100021 4 udp 32770 nlockmgr
100021 1 tcp 32770 nlockmgr
100021 3 tcp 32770 nlockmgr
100021 4 tcp 32770 nlockmgr
100005 1 udp 786 mountd
100005 1 tcp 789 mountd
100005 2 udp 786 mountd
100005 2 tcp 789 mountd
100005 3 udp 786 mountd
100005 3 tcp 789 mountd
dragonfly ~ #
myth14 ~ # rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 1024 status
100024 1 tcp 1025 status
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 udp 1026 nlockmgr
100021 3 udp 1026 nlockmgr
100021 4 udp 1026 nlockmgr
100021 1 tcp 1026 nlockmgr
100021 3 tcp 1026 nlockmgr
100021 4 tcp 1026 nlockmgr
100005 1 udp 889 mountd
100005 1 tcp 892 mountd
100005 2 udp 889 mountd
100005 2 tcp 892 mountd
100005 3 udp 889 mountd
100005 3 tcp 892 mountd
myth14 ~ #
To my UNtrained eye the two look the same.
Thanks,
Mark
--
[email protected] mailing list
