On Sun, May 23, 2021 at 10:09 AM Dale <[email protected]> wrote: > > Arve Barsnes wrote: > > On Sun, 23 May 2021 at 18:22, Dale <[email protected]> wrote: > >> If you ever figure it out, please post what did it. I watch TV from my > >> puter too. Right now, I tell Smplayer to send audio to the TV by giving > >> it the device name like you did. Thing is, none of the entries in the > >> drop down menu in settings works. Odd but it is what it is. > > Might be worth checking if the smplayer front-end is messing something > > up, by going straight through mpv. My last steps for playing video > > through the TV, with the audio going there as well: > > > > Get a list of all the audio devices on your system. > > $ mpv --audio-device=help > > > > Use the correct device in your video command. > > DISPLAY=:0.1 mpv --audio-device=alsa/hdmi:CARD=NVidia,DEV=0 -fs video.mkv > > > > Also check what Mark mentioned about muted channels on the output card > > through alsamixer. > > > > Regards, > > Arve > > > > > > > When I set mine up, I just set output driver to user defined and entered > alsa:device=hw=1.7 in settings. I only want Smplayer to output to the > TV. Everything else goes to the speakers hooked to the computer itself. > > The day may come when I use something other than Smplayer to watch TV > tho. If, or when, that day comes I'll have to figure out how to get the > audio to work with it. Right now, I'm still able to use the old gnome > player still. It's going to die one day tho since it is no longer > maintained. > > I do find these audio topics interesting tho. It seems it should be > easy to send sound to any place it can go but it isn't easy to do for > real. It seems it is a problem for a lot of people doing what I think > is at least somewhat common. > > Either way, glad you got it working. It took me days to figure out mine > too. > > Dale > > :-) :-)
Dale and Arve, As I do home studio type recording using Linux I always find this topic quite interesting but because of the more complicated setup of my audio environment which makes use of a Hammerfall DSP card driving the speaker but utilizes the internal Intel sound card for general audio, along with cables outside to hook the two together, I'm just not sure what I see on my system is very helpful to you two. Nonetheless I do have an older NVidia GPU and would like to understand what's going on with all of this. A couple of requests: 1) instead of aplay -l please run aplay -L 2) Also provide the output of cat /proc/asound/card2/codec#0 Note: Your card number may well be different than mine card0=Hammerfall, card1=Internal Intel sound, card2=NVidia Also, there is an old (2014) document online from NVidia that provides a lot of info on Alsa device naming and how NVidia GPUs handle audio. It's one of the better ones I've found online making the dangerous assumption that it hasn't all changed. There's lots of info in this document about system config edits for non-pulseaudio users and things that might possibly be of interest to Gentoo users with configuration more like Arve's, but again, that's a guess on my part. https://download.nvidia.com/XFree86/gpu-hdmi-audio-document/ No rush on any of this. Thanks, Mark
