Hi, On (02/01/06 13:21), Michael Sullivan wrote: > On Mon, 2006-01-02 at 21:01 +0000, Rumen Yotov wrote: > > Hi, > > On (02/01/06 12:30), Michael Sullivan wrote: > > > On Mon, 2006-01-02 at 20:17 +0000, Rumen Yotov wrote: > > > > Hi, > > > > On (02/01/06 11:21), Michael Sullivan wrote: > > > > > On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: > > > > > > On Sun, 01 Jan 2006 16:57:32 -0600 > > > > > > Michael Sullivan <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > > > > ...SKIP... > > > > > (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 2 10:58:02 2006 > > > > > (==) Using config file: "/etc/X11/xorg.conf" > > > > > (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) > > > > > > > > > > > > > > > Holly said something about my kernel not being set up correctly when I > > > > > was having this problem with gdm, but gdm works just fine. Just kdm > > > > > and > > > > > the custom session. How do I compile apg into my kernel to fix this? > > > > > Here's my kernel config, created by genkernel: > > > > > > > > > > # > > > > > # Automatically generated make config: don't edit > > > > > # Linux kernel version: 2.6.14-gentoo-r5 > > > > > # Sun Jan 1 22:22:04 2006 > > > > > # > > > > > CONFIG_X86=y > > > > > CONFIG_SEMAPHORE_SLEEPERS=y > > > > > CONFIG_MMU=y > > > > > CONFIG_UID16=y > > > > > CONFIG_GENERIC_ISA_DMA=y > > > > > CONFIG_GENERIC_IOMAP=y > > > > > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > > > > >...SKIP... > > > > > > > > > > # > > > > > # Ftape, the floppy tape device driver > > > > > # > > > > > # CONFIG_AGP is not set > > > > ==============^ switch this to ON plus the entry for your motherboard > > > > chips support. > > > > > > How do I find out what the entry for my motherboard chips (-set I > > > assume) is? Is there a software way to determine this? All I know is > > > that it's SUPPOSED to be a Pentium IV, but it might not be... > > > > > > -- > > > [email protected] mailing list > > > > > Use "lspci" or "lshw" (emerge if not available), use -v -vv -vvv for a more > > verbose output. > > Tuning your kernel *requires* you to at least know what your basic hardware > > is. Manual ? > > Try: "#lspci | grep -i VGA" or "lspci | grep -i video" > > Or post the output here. > > PS:could also be done using a LiveCD (gentoo-install-CD, Knoppix etc.) > > Rumen > > Here's the lscpi output: > > camille ~ # lspci | grep -i VGA > 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL > Express Chipset Family Graphics Controller ==================================================================^ > camille ~ # lspci | grep -i video > 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > > > Here's my full lspci output; I don't know if you need it: > > camille ~ # lspci > 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor > to I/O Controller > 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL > Express Chipset Family Graphics Controller > 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) High Definition Audio Controller (rev 03) > 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) PCI Express Port 1 (rev 03) > 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) PCI Express Port 2 (rev 03) > 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) PCI Express Port 3 (rev 03) > 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) PCI Express Port 4 (rev 03) > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #1 (rev 03) > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #2 (rev 03) > 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #3 (rev 03) > 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #4 (rev 03) > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB2 EHCI Controller (rev 03) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) > 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC > Interface Bridge (rev 03)00:1f.1 IDE interface: Intel Corporation > 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) > 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA > Controller (rev 03) > 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > SMBus Controller (rev 03) > 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > 05:01.0 Communication controller: U.S. Robotics Unknown device 2f00 (rev > 01) > 05:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - > PRO/100 VE (LOM) Ethernet Controller (rev 01) > > > -- > [email protected] mailing list > So seems you have an Intel-910/915 video controler (i don't have Intel). So switch CONFIG_AGP=ON and afterwards enable Intel-910 ot similar video controler. Could do a: "genkernel --menuconfig --install all" - this will use your old config display a text-driven menu for kernel config and after exiting will compile&install (in /boot) your new kernel&modules. If you wish backup the old one before that. HTH.Rumen
pgpiQl4u1rZqV.pgp
Description: PGP signature
