Alle 16:24, domenica 26 marzo 2006, JimD ha scritto: > On Sun, 26 Mar 2006 14:35:42 +0000 > > [EMAIL PROTECTED] wrote: > > Well, using lspci -v > > > > 02:07.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem > > 02:Model 5610 > > (rev 01) (prog-if 02 [16550]) > > Subsystem: 3Com Corp, Modem Division Unknown device 00d7 > > Flags: medium devsel, IRQ 16 > > I/O ports at dc00 [size=8] > > Capabilities: [dc] Power Management version 2 > > > > then dmesg | grep tty > > > > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > > 0000:02:07.0: ttyS1 at I/O 0xdc00 (irq = 16) is a 16550A > > > > So I think modem is on /dev/ttyS1. > > > > Question: why cannot I set up KPPP? > > OK, that helps : ) > > Now Google should be all you need. I searched google for > > linux 3Com 5610 > > and found some interesting links. This one is about the 3Com 5610: > > http://baheyeldin.com/linux/how-to-setup-a-modem-with-linux.html > > There is always http://www.linmodems.org/. You should read > linmodems.org because you can download their scanModem tool and run > that for help. > > Jim
Solved!! Thank you emilio -- [email protected] mailing list
