Will the hotplug package work on these drives? > > From: "Sieb, Glenn E (Glenn)" <[EMAIL PROTECTED]> > Date: 2006/04/21 Fri PM 04:46:38 EDT > To: gentoo-user@lists.gentoo.org > Subject: [gentoo-user] Hotpluggable SATA question... > > Hmm. > > I have servers using the SuperMicro P8SCT motherboard, which supports > hot-pluggable SATA drives. > > In Gentoo they show as being SCSI, fine, no problem with that. > > If I hotplug a drive into the chassis--it powers up, but Gentoo doesn't see > it until reboot. > > Has anyone else used hotpluggable SATA drives in Gentoo 2006.0? Is there some > mysterious package I need to emerge for this to work right? > > Output of dmesg follows. > > Thanks in advance, > Best, > --Glenn > > Linux version 2.6.15-gentoo-r5 ([EMAIL PROTECTED]) (gcc version 3.4.4 (Gentoo > 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Mon Feb 13 20:23:47 UTC 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) > BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) > BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data) > BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > 1142MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000f3a60 > On node 0 totalpages: 521952 > DMA zone: 4096 pages, LIFO batch:0 > DMA32 zone: 0 pages, LIFO batch:0 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 292576 pages, LIFO batch:31 > DMI 2.3 present. > ACPI: RSDP (v000 IntelR ) @ 0x000f7bc0 > ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e3040 > ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e30c0 > ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e7540 > ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e7440 > ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x7f6e75c0 > ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20041203) @ 0x7f6e7a50 > ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > Processor #1 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) > IOAPIC[1]: apic_id 5, version 32, address 0xfec84400, GSI 24-47 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 2 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000) > Built 1 zonelists > Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 > real_root=/dev/sda3 > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > mapped IOAPIC to ffffb000 (fec84400) > Initializing CPU#0 > CPU 0 irqstacks, hard=c0427000 soft=c041f000 > PID hash table entries: 4096 (order: 12, 65536 bytes) > Detected 3400.303 MHz processor. > Using tsc for high-res timesource > Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 2061544k/2087808k available (2388k kernel code, 24896k reserved, 561k > data, 220k init, 1170304k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay using timer specific routine.. 6808.63 BogoMIPS > (lpj=34043180) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 > 0000649d 00000000 00000000 > CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 > 0000649d 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d > 00000000 00000000 > mtrr: v2.0 (20020519) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 > Booting processor 1/1 eip 2000 > CPU 1 irqstacks, hard=c0428000 soft=c0420000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 6800.40 BogoMIPS > (lpj=34002005) > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 > 0000649d 00000000 00000000 > CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 > 0000649d 00000000 00000000 > monitor/mwait feature present. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d > 00000000 00000000 > CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 > Total of 2 processors activated (13609.03 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > checking if image is initramfs... it is > Freeing initrd memory: 3941k freed > NET: Registered protocol family 16 > EISA bus registered > ACPI: bus type pci registered > PCI: PCI BIOS revision 3.00 entry at 0xfa030, last bus=5 > PCI: Using MMCONFIG > ACPI: Subsystem revision 20050902 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:02.0 > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 > PCI: PXH quirk detected, disabling MSI for SHPC device > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P1AB.PXHA._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 13 devices > SCSI subsystem initialized > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > pnp: 00:09: ioport range 0x400-0x4bf could not be reserved > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Bridge: 0000:01:00.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: d0000000-d00fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: d0100000-d01fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: d0200000-d02fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Setting latency timer of device 0000:01:00.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > audit: initializing netlink socket (disabled) > audit(1144679805.580:1): initialized > highmem bounce pool size: 64 pages > Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher > SGI XFS with ACLs, security attributes, realtime, large block numbers, no > debug enabled > SGI XFS Quota Management subsystem > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie03] > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie02] > Allocate Port Service[pcie03] > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie02] > Allocate Port Service[pcie03] > initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A > 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > mice: PS/2 mouse device common for all mice > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > loop: loaded (max 8 devices) > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ide0: I/O resource 0x1F0-0x1F7 not free. > ide0: ports already in use, skipping probe > Probing IDE interface ide1... > hdd: LITE-ON DVD SOHD-16P9S, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > hdd: ATAPI 48X DVD-ROM drive, 254kB Cache > Uniform CD-ROM driver Revision: 3.20 > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: bitmap version 4.39 > EISA: Probing bus 0 at eisa.0 > EISA: Detected 0 cards. > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 6, 262144 bytes) > TCP established hash table entries: 262144 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Starting balanced_irq > Using IPI Shortcut mode > Freeing unused kernel memory: 220k freed > usbcore: registered new driver usbfs > usbcore: registered new driver hub > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd03c0000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Initializing USB Mass Storage driver... > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > USB Universal Host Controller Interface driver v2.3 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e100 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e300 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > sl811: driver sl811-hcd, 19 May 2005 > ieee1394: Initialized config rom entry `ip1394' > sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]> > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) > ieee1394: sbp2: Try serialize_io=0 for better performance > libata version 1.20 loaded. > ahci 0000:00:1f.2: version 1.2 > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 > ACPI: PCI interrupt for device 0000:00:1f.2 disabled > ahci: probe of 0000:00:1f.2 failed with error -12 > ata_piix 0000:00:1f.2: version 1.05 > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 > ata: 0x170 IDE port busy > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 > ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 > 88:207f > ata1: dev 0 ATA-7, max UDMA/133, 234441648 sectors: LBA48 > ata1: dev 0 configured for UDMA/133 > scsi0 : ata_piix > Vendor: ATA Model: WDC WD1200JS-00M Rev: 02.0 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) > SCSI device sda: drive cache: write back > SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) > SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 > sd 0:0:0:0: Attached scsi disk sda > device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] > ReiserFS: sda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs > on sda3 > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1574360k swap on /dev/sda2. Priority:-1 extents:1 across:1574360k > EXT3 FS on sda3, internal journal > tg3.c:v3.47 (Dec 28, 2005) > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) > 10/100/1000BaseT Ethernet 00:30:48:88:8e:20 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] > TSOcap[1] > eth0: dma_rwctrl[76180000] > ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:04:00.0 to 64 > eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) > 10/100/1000BaseT Ethernet 00:30:48:88:8e:21 > eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] > TSOcap[1] > eth1: dma_rwctrl[76180000] > Real Time Clock Driver v1.12 > input: PC Speaker as /class/input/input0 > FDC 0 is a post-1991 82077 > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > tg3: eth0: Link is up at 1000 Mbps, full duplex. > tg3: eth0: Flow control is on for TX and on for RX. > > -- > Glenn E. Sieb, MTS > Bell Laboratories > [EMAIL PROTECTED] > +1 732 949 5453 > -- > gentoo-user@gentoo.org mailing list > >
-- gentoo-user@gentoo.org mailing list
