On Sat, 2006-06-17 at 19:22 -0700, Alan wrote:
> Alternatively if camille is the local server, try setting the database
> hostname in the mythtv set up to localhost instead.
>
> --
> Alan <[EMAIL PROTECTED]> - http://arcterex.net
> --------------------------------------------------------------------
> "Backups are for people who don't pray." -- big Mike
I figured out how to get mythfrontend to connect to the database. I did
what you said and changed "camille" to "localhost". Now I have a new
problem; I can't watch LiveTV. I'm not sure why. If I go to Schedule
Recordings I see what I expected to see. When I go to Watch LiveTV, I
get some funky output in my terminal. Here's the important info:
camille mythtv # uname -a
Linux camille 2.6.15-gentoo-r1 #1 SMP Thu Jun 15 16:50:26 CDT 2006 i686
Intel(R) Celeron(R) CPU 2.66GHz GNU/Linux
camille mythtv # lspci -v
.
.
.
05:00.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
.
.
.
camille mythtv # dmesg | grep 'ivtv'
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.5 (tagged release) loading
ivtv: Linux version: 2.6.15-gentoo-r1 SMP 486 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
ivtv0: Create encoder radio stream
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPEG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
camille mythtv #
[EMAIL PROTECTED] ~ $ mythfrontend
2006-06-17 21:45:31.805 Using runtime prefix = /usr
2006-06-17 21:45:31.827 XScreenSaver support enabled
2006-06-17 21:45:31.909 New DB connection, total: 1
2006-06-17 21:45:31.947 Connected to database 'mythconverg' at host:
localhost
2006-06-17 21:45:31.950 Total desktop dim: 1024x768, with 1 screen[s].
2006-06-17 21:45:31.964 Using screen 0, 1024x768 at 0,0
2006-06-17 21:45:31.972 Current Schema Version: 1123
2006-06-17 21:45:31.972 mythfrontend version: 0.19.20060121-2
www.mythtv.org
2006-06-17 21:45:31.973 Enabled verbose msgs: important general
2006-06-17 21:45:32.158 lang0: eng
2006-06-17 21:45:32.158 lang: eng
2006-06-17 21:45:32.192 lang1: eng
2006-06-17 21:45:32.193 lang: eng
2006-06-17 21:45:32.310 Total desktop dim: 1024x768, with 1 screen[s].
2006-06-17 21:45:32.313 Using screen 0, 1024x768 at 0,0
2006-06-17 21:45:32.323 Switching to square mode (G.A.N.T.)
mythtv: could not connect to socket
mythtv: No such file or directory
lirc_init failed for mythtv, see preceding messages
2006-06-17 21:45:32.756 Joystick disabled.
2006-06-17 21:45:32.849 Registering Internal as a media playback plugin.
2006-06-17 21:45:37.001 New DB connection, total: 2
2006-06-17 21:45:37.002 Connected to database 'mythconverg' at host:
localhost
2006-06-17 21:45:37.052 Connecting to backend server: 192.168.1.3:6543
(try 1 of 5)
2006-06-17 21:45:57.058 ReadStringList timeout (quick).
2006-06-17 21:45:57.059 Unexpected response to MYTH_PROTO_VERSION:
2006-06-17 21:45:57.071 TV: Attempting to change from None to None
^C
[EMAIL PROTECTED] ~ $
Can anyone help me make sense of this output?
--
[email protected] mailing list
