On Tue, 2006-07-04 at 14:41 +0000, James wrote:
> Iain Buchanan <iaindb <at> netspace.net.au> writes:
>
>
> > hotplug doesn't hotplug!
>
> I've recently discovered these 2 little jewels. They may not help, but
> it's worth a whirl.
>
> # udevstart [after you boot and then connect the device to 1394]
>
> # udevinfo -q all -d | grep <camera>
thanks! that did the trick - this may not be the right way, but at least
it works:
1. unplug camera
2. unload all ieee / 1394 modules (may I don't need to do all, but I did
anyway). iee1394 couldn't be unloaded without first unloading raw1394.
3. load raw1394 and dv1394
4. run udevstart
5. plug in camera
eg:
$ sudo modprobe -r dv1394 raw1394 ohci1394 ieee1394
$ lsmod | grep 1394
$ sudo modprobe raw1394
$ sudo modprobe dv1394
$ sudo udevstart
$ sudo kino
thanks,
--
Iain Buchanan <iaindb at netspace dot net dot au>
To avoid criticism, do nothing, say nothing, be nothing.
-- Elbert Hubbard
--
[email protected] mailing list
