On 7/14/06, Korthrun <[EMAIL PROTECTED]> wrote:
Heyyas,

     I'm running:
Xorg 7.0-r1
nvidia-kernel 1.0.8762
nvidia-glx 1.0.8762

     I've followed the guide at
http://www.gentoo.org/doc/en/nvidia-guide.xml with the following
exceptions. I'm using a kernel.org kernel not a portage kernel, and I
didn't make the "changes" regarding framebuffers because I don't
intend to use one.That whole bit is disabled in my kernel.

    X starts up fine and looks great, I get decent FPS from glxgears.
While following the above guide I get to this point "Code Listing
2.19: Checking the direct rendering status" and end up with this:

glxinfo | grep direct
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
direct rendering: No

    My Xorg.conf follows:
######Start xorg.conf
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen[0]" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/share/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/75dpi"
        FontPath     "/usr/share/fonts/100dpi"
        FontPath     "/usr/share/fonts/TTF"
        FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
        Load  "glx"
        Load  "extmod"
        Load  "xtrap"
        Load  "record"
        Load  "dbe"
#       Load  "dri"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "Buttons" "7"
        Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor[0]"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
        HorizSync 30-70
        VertRefresh 50-180
EndSection

Section "Device"
        Identifier  "Device[0]"
        Driver      "nvidia"
EndSection

Section "Screen"
        Identifier "Screen[0]"
        Device     "Device[0]"
        Monitor    "Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes "1280x1024"
        EndSubSection
EndSection

Section "DRI"
        Group "video"
        Mode 0660
EndSection

######End xorg.conf

     I've tried it both with and without this last stanza regarding
DRI. I tossed it in there for giggles since I needed it with my ATI
card. One thing I haven't ventured to yet is recompilin xorg. When I
compiled it I did have VIDEO_CARDS set to radeon. Will this effect
xorg working with nvidia cards? What would the proper VIDEO_CARDS
setting be for a geforce 6800?

    Any suggestions/comments are very welcome. Thanks muchly.,

Korf
--
()  The ASCII Ribbon Campaign - against HTML Email,
/\  vCards, and proprietary formats.
--
[email protected] mailing list

It may have i would sujest trying with VIDEO_CARDS="nvidia" and see.. i'm not sure i haven't moved my box with an nvidia to xorg7
cynyr

Reply via email to