As dmraid is hard masked and it's future doesn't look to bright I have decided to give software raid a try (http://www.gentoo.org/doc/en/gentoo-x86-tipsntricks.xml). Everything works fine with one exception, when I boot the system I'm getting the following error: Starting up RAID devices (mdadm) mdadm: No arrays found in config file
But the system comes up correctly. My /etc/mdadm.conf file contains the
following:
ARRAY /dev/md4 level=raid1 num-devices=2
UUID=f03ab886:29539a16:60351ac2:644491c6
ARRAY /dev/md3 level=raid1 num-devices=2
UUID=b4721e3b:7eab0b51:231a400e:3e228ff3
ARRAY /dev/md2 level=raid1 num-devices=2
UUID=b660191e:81583b46:491c57c8:2ebb62b2
ARRAY /dev/md1 level=raid1 num-devices=2
UUID=f3134895:0a4f292b:8b078635:1f67f091
and cat /proc/mdstat gives:
Personalities : [raid1]
md1 : active raid1 hdc1[1] hda1[0]
32000 blocks [2/2] [UU]
md2 : active raid1 hdc2[1] hda2[0]
505920 blocks [2/2] [UU]
md3 : active raid1 hdc3[1] hda3[0]
497920 blocks [2/2] [UU]
md4 : active raid1 hdc4[1] hda4[0]
79377088 blocks [2/2] [UU]
unused devices: <none>
Any ideas why mdadm (mdadm -As) can not find my arrays at boot time.
--
Dan Johansson, <http://www.dmj.nu>
***************************************************
This message is printed on 100% recycled electrons!
***************************************************
pgp8CiZQW4td2.pgp
Description: PGP signature
