(sorry, must have overlooked your last answer...)
On Thu, 14 Sep 2006 01:32:36 -0700 Grant <[EMAIL PROTECTED]> wrote:
> I always seem to get hsync out of range errors trying to go this low.
> I guess my card can't go as low as necessary.
Argh, my failure. I must have read "19.5 kHz" instead of 15.9 kHz, so
try a HorizSync of 15-16.
The exact frequency can probably be calculated from the modeline:
Modeline "736x485i" 14.16 736 760 824 904 485 491 496 525 interlace -hsync
-vsync
would be
14.16MHz / 904 "virtual line lenght" = 15,66 kHz
I've also read values like 14.35 MHz for the pixel clock.
The i810 should work for pixel clock frequencies >= 9,5 MHz (the driver
sources tell that), so it *should* work.
It doesn't seem to want to go below 26, plus the source specifically
says interlacing is not supported. I tried it with a couple other
video cards I have with the same results as far as the sync.
I really appreciate your help, but I'm going to go ahead return the
9a60 and get an HDTV.
- Grant
--
[email protected] mailing list
