Sorry - meant to attach this also. Make sure you're building certain things with the alsa USE flag and preferably with the esd flag turned off. At least that's what I do:
[ebuild R ] media-sound/esound-0.2.36-r2 USE="alsa ipv6 tcpd -debug" 0 kB [ebuild R ] gnome-base/control-center-2.16.2 USE="alsa -debug -eds" 0 kB On 1/7/07, Mark Knecht <[EMAIL PROTECTED]> wrote:
On 1/7/07, David Relson <[EMAIL PROTECTED]> wrote: > I've been using Linux for 6 or 8 years -- without speakers. Today I > decided to take a trip on the wild side and install speakers. It has > been interesting. > > I've been using /usr/bin/gnome-sound-properties (started from Gnome > start button via system//preferences/sound (from nu) to test my > configuration. From the Sounds tab, all the System Sounds work > perfectly. However the Devices tab works fine when ESD (Enlightenment > Sound Daemon) is selected and doesn't work at all when "ALSA" is > selected. In this case, "doesn't work" means the following dialog is > displayed: > > audiotestsrc wave=sine freq=512! > audioconvert ! audioresample ! gconfaudiosink: > Could not open resource for writing. > > Any tips on what I should check? I've not done exactly what you are doing but make sure that Alsa is selected in the Sound prefernces. Also, if ESD has been running then it will likely block Alsa from getting to the sound cards. Make sure that the ESD daemon has been killed. > > Question 2: Is either ESD or ALSA to be preferred? Why? I would think Alsa since it's widely supported and they pretty quickly take care of things when you have problems or new hardware comes out. Since ESD is Gnome specific (I think) then if you switched environments - to say fluxbox or something lighter, or KDE on the heavy end) then you'd have more fooling around to do. I thought there was a way to tell ESD to use Alsa but I don't really know. I don't use any system sounds in Gnome myself. Hope this helps, Mark > > > Regards, > > David > -- > [email protected] mailing list > >
-- [email protected] mailing list
