Daniel Pielmeier wrote:
> At OpenPrinting there is no record for your HP PSC 1610 but for HP PSC
> 1600 which should work perfectly. So yours should be working as well i
> guess! Are you using the HP drivers?
Yes, I've downloaded the recommended hpijs driver, and this should work.
The problem is using the localhost:631 interface, I don't know either:
1. The device. It's a USB printer, but the choices are:
AppSocket/HP JetDirect
Backend Error Handler
Internet Printing Protocol (http)
Internet Printing Protocol (ipp)
LPD/LPR Host or Printer
SCSI Printer
Serial Port #1
Serial Port #2
None of these seem appropriate.
2. The Device URI. When I check /var/log/messages it gives the
mount-point as:
/devices/pci0000:00/0000:00:10.2/usb4/4-2/4-2:1.3/host1/target1:0:0/1:0:0:0
When supplied to CUPS this results in a "successful" install after
enabling FileDevice in /etc/cups/cupsd.conf, but printing a test page
produces the error message:
"/usr/libexec/cups/backend//devices/pci0000 failed"
Many thanks for any assistance with this.
Carl Adams.
--
[email protected] mailing list
