Hi all,
Should I ask another mailinglist about this problem?
From: Ásgeir Halldórsson [mailto:[EMAIL PROTECTED]
Sent: 7. febrúar 2007 10:30
To: [email protected]
Subject: [gentoo-user] QLogic QLA2xxx driver kernel 2.6.18+
Hi all,
Has anyone found a solution to how to load the firmware dirvers on boot in
2.6.18+ kernels. I read something about you need to put the /lib/firmware
files into initrd. But I dont know how or where to put it in. My setup is IBM
Blade Ceneter with HS20 blades (Intel Xeon cpus) with Qlogic 2412 FC card. I
boot from the san so i need the firmware into the kernel.
ERROR:
QLogic Fibre Channel HBA Driver
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 32 (level, low) -> IRQ 193
qla2xxx 0000:05:08.0: Found an ISP2312, irq 193, iobase
0xffffc20000006000
qla2xxx 0000:05:08.0: Configuring PCI space...
qla2xxx 0000:05:08.0: Configure NVRAM parameters...
qla2xxx 0000:05:08.0: Verifying loaded RISC code...
qla2xxx 0000:05:08.0: Firmware image unavailable.
qla2xxx 0000:05:08.0: Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/.
qla2xxx 0000:05:08.0: Failed to initialize adapter
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:05:08.1[B] -> GSI 33 (level, low) -> IRQ 201
qla2xxx 0000:05:08.1: Found an ISP2312, irq 201, iobase
0xffffc20000006000
qla2xxx 0000:05:08.1: Configuring PCI space...
qla2xxx 0000:05:08.1: Configure NVRAM parameters...
qla2xxx 0000:05:08.1: Verifying loaded RISC code...
qla2xxx 0000:05:08.1: Firmware image unavailable.
qla2xxx 0000:05:08.1: Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/.
qla2xxx 0000:05:08.1: Failed to initialize adapter
Kveðja / Regards
Ásgeir Halldórsson
E.C. Software
