On 3/30/07, Jakob <[EMAIL PROTECTED]> wrote:
Hello List,
I'm trying to set up an server with a RAID 5 but its not recognized by
the system.
Mainboard: Asus P5B Deluxe
CPU: Core2Duo 6600 2,40 GHz
Storage: 3x 320GB Hitachi SATA2
I've setup the RAID 5 withe the onboard Intel Matrix Storage Controller
I've tried about 5 different livecd's but none of them recognized the
RAID5, I always have /dev/sda sdb sdc with each 320GB but no RAID.
After several tryouts I managed to install gentoo to an new attached
IDE drive and built my own kernel (2.6.19-r5 gentoo sources) because I
thought maybe the kernels from the livecds are to old but I still have
the problem that the RAID isnt recognized.
for now I think the problem is the Intel Matrix Storage controller.
Did someone managed to get the RAID recognized with this controller?
Do I have to use an newer kernel version?
thisis the output of lspci:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller
Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2
EHCI #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB
UHCI #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2
EHCI #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC
Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) SATA AHCI
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown
device 4364 (rev 12)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller (rev 02)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 02)
05:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
05:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 14)
the livecds I've tried are:
gentoo 2006.1 livecd
gentoo-small x86 from kernel of truth
gentoo-small amd64 from kernel of truth
knoppix 5.1.1 DVD
fedora core 6 DVD
I've also flashed the bios to the newest version.
I hope someone could help me.
thanks in advance
Kind regards
Jakob
--
gentoo-user@gentoo.org mailing list
http://gentoo-wiki.com/HOWTO_Install_Gentoo_with_NVRAID_using_dmraid
--
-·=»Ðŧħ«=·-
���z� ��(��&j)b� b�
