> -----Original Message----- > From: maxim wexler [mailto:[EMAIL PROTECTED] > Sent: Monday, May 28, 2007 10:09 AM > To: [email protected] > Subject: [gentoo-user] no audio > > > Hi group, > > For a 2.6.19.5 kernel on a PIII w/SBLive soundcard > using snd-emu10k1 module. I emerged alsa-utils and > mp3blaster. > > Ran #rc-update add alsasound boot > > Ran alsaconf and let it write /etc/modules.d/alsa. It > concluded with a tell-tale pop from the speakers and > the message that my sound card was set up and ready to > use. > > But mp3blaster won't play. Msg is "Failed to open > sound device" > > Noticed under /dev/sound there was no 'audio' or 'dsp' > nodes so I made them w/ mknod. > > No good, same msg. > > Set ENABLE_OSS_EMUL="no" in /etc/conf.d/alsasound and > rebooted. > > Ditto. > > Is this a configuration problem or a soundcard problem > or is mp3blaster to blame? > > FWIW modules loaded, alsamixer unmuted. > > Maxim > > > > ______________________________________________________________ > ______________________Take the Internet to Go: Yahoo!Go puts > the Internet in your pocket: mail, news, photos & more. > http://mobile.yahoo.com/go?refer=1GNXIC > -- > [EMAIL PROTECTED] mailing list
With the newer kernels, you don't need to do anything outside the kernel for Alsa sound most of the time. Make sure to configure the kernel so that it has basic sound support enabled (I would compile this into the kernel, not as a module, but that is me). Next, on the menu where you choose options, leave OSS unmarked, and select Alsa support. On the submenu for Alsa support, select everything that applies (Do select OSS Emulation, as some packages don't ASK which driver you are using, they just assume the one they want is there). If you select extra things here, it won't matter much. The extra items are just Midi drivers, and if you don't have Midi hardware, they aren't an issue either way. ^_^ In other words, on this screen it is safe to select pretty much everything. On the screen for PCI drivers, select the option(s) appropriate for your hardware. 'lspci' should show which sound card your system has. If you are using devfs, then the device nodes should be created automatically, if not then I am not sure how to create them manually in an old style system. It is possible, that you may need to manually chmod a+wr the device node in order use them (This is assuming they are there, which you said they were not I think). Also dsp, should be /dev/dsp in many cases. Many of the items you want will be under /dev directly instead of /dev/sound These may be links to the /dev/sound items, but I am not sure. ^^;; More experienced people can probably tell you that. -- [EMAIL PROTECTED] mailing list
