Thanks for the help, it works now! But one thing is still not clear for me: why isn't xorg able to determine the horizsync and vertrefresh rates automatically?
Istvan szerda 18 július 2007 15.22 dátummal Steve Dommett ezt írta: > Stefán István wrote: > > (II) NV(0): Monitor0: Using default hsync range of 31.50-37.90 kHz > > (II) NV(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz > is the reason all the other modes are being disabled: > > (II) NV(0): Not using default mode "640x350" (vrefresh out of range) > > (II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) > > Try adding the HorizSync and VertRefresh options to the Monitor section > of your xorg.conf: > > Section "Monitor" > > Identifier "Monitor2" > > ModelName "Sharp LC-42XD1E" > > DisplaySize 1161 653 > > HorizSync 31.0 - 150.0 > > VertRefresh 48.0 - 75.0 > Also it seems you're lacking a modeline for the 1440x900 resolution of > your DFP. This one /might/ work: > > Modeline "1440x900" 108.84 1440 1472 1880 1912 900 918 927 946 > > Good luck! > -- > [EMAIL PROTECTED] mailing list > > -- [EMAIL PROTECTED] mailing list