AJ Spagnoletti wrote:
> After several days of googling and searching for a solution to this I
> am still clueless so I will pose the question to the list. At my dorm
> I have a wireless router (WRT54G) with a WPA encryption on it. I am
> trying to configure WPA Supplicant to connect to this router but I am
> getting an error with it. First here is my net conf file and my
> wpa_supplicant.conf files
>
> modules=( "wpa_supplicant" )
> wpa_supplicant_eth1="-Dwext"
> config_eth1=( "dhcp" )
>
> and
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=0
> ap_scan=1
>
> network={
> ssid="Easy_Mac"
> proto=WPA
> key_mgmt=WPA-PSK
> pairwise=CCMP TKIP
> group=CCMP TKIP WEP104 WEP40
> psk=k8aqn2zcz497zupa
> priority=5
> }
>
> Now here is the error message I am receiving
>
> Dragon wpa_supplicant # /etc/init.d/net.eth1 start
> * Caching service dependencies ... [
> ok ]
> * Starting eth1
> * Starting wpa_supplicant on eth1 ...
> Line 14: Invalid PSK 'k8aqn2zcz497zupa'.
> Line 14: failed to parse psk 'k8aqn2zcz497zupa'.
> Line 16: WPA-PSK accepted for key management, but no PSK configured.
> Line 16: failed to parse network block.
> Failed to read or parse configuration
> '/etc/wpa_supplicant/wpa_supplicant.conf'.
> /lib/rcscripts/sh/rc-daemon.sh: line 231: 13831 Segmentation fault
> /sbin/start-stop-daemon '--start' '--exec' '/sbin/wpa_supplicant'
> '--pidfile' '/var/run/wpa_supplicant-eth1.pid' '--' '-Dwext'
> '-c/etc/wpa_supplicant/wpa_supplicant.conf' '-W' '-B' '-ieth1'
> '-P/var/run/wpa_supplicant-eth1.pid' [ !! ]
>
>
> The wireless card I am using is the intel pro wireless 3945
>
> 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
> Network Connection (rev 02)
>
> note the card works fine with no encryption or a wep encryption using iwconfig
>
> Thanks
> AJ
>
Use: psk="k8aqn2zcz497zupa"
--
[EMAIL PROTECTED] mailing list
