Ok so my line below of:

cat /etc/portage/package.use | grep apache2

was wrong; if you noticed from the text at the end, I really ran:

cat /etc/portage/package.use | grep apache

However, I did follow the directions at the URL, but changing
APACHE2_MODULES to APACHE_MODULES make it work...hopefully everything
else (namely Subversion) will continue to work...

If this was not the right then, and I have to remerge...well, what
would be the right thing? If is is the right then shouldn't the page be
updated? I just pulled the command set off of it from Code Listin 1.1
and ran it.

TIA,

Ben

--- deface <[EMAIL PROTECTED]> wrote:

> There nos no apache2 use flag, it was replaced w/ just apache
> 
> 
> On Jan 26, 2008, at 4:57 PM, Benjamen R. Meyer wrote:
> 
> > I'm trying to update the software on my system, among which is
> Apache,
> > going from 2.2.6-r5 to 2.2.6-r7. However, I am running into a
> problem
> > with it.
> >
> > Apparently the old install was using the apache2-builtin-mods file;
>  
> > so I
> > followed the documentation at
> > http://www.gentoo.org/doc/en/apache-upgrading.xml to convert it
> over  
> > to
> > the APACHE2_MODULES and APACHE2_MPMS - but it is still giving me
> the
> > same error - that mime, dir, and host_authz are disabled.
> >
> > After searching on-line, I found the post below which the user
> solved
> > the issue by adding mime, dir, and host_authz to their package.use 
> 
> > flag
> > for apache2. However, that did not solve it for me.
> >
> > Below is the output of "emerge -vuDN" captured via script, where I
> > stopped via CTRL+C after it posted its message claiming that the
> build
> > would be "unsupported". After that I cat'd my /etc/make.conf file
> in  
> > its
> > entirely (not long yet), and also ran:
> >
> > cat /etc/portage/package.use | grep apache2
> >
> > To try to add the relevant lines from /etc/portage/package.use.
> >
> > I'm at a loss of what to do. Any help or direction would be greatly
> > appreciated.
> >
> >
> > TIA,
> >
> > Ben
> >
> > Script started on Sat Jan 26 17:43:06 2008
> > ]0;[EMAIL PROTECTED]:~/emerge-to-run[?1034hwitness
> > emerge-to-run # emerge - world -VUDN    vud DNp 
> > ]0;Started emerge on: Jan 26, 2008 17:43:23]0; *** emerge
> --newuse
> > --deep --update --verbose world
> > These are the packages that would be merged, in
> order:
> >
> > Calculating world
> > dependencies   - | - | - \ \ \ \ / | -
> |  
> > - |
> > | - | - / - / / - \ \ - | \ - /  
> > \ / \
> > / / - \ | - \ | / - \ | / - | - /
>  
> > \ -
> > / \ / | - | - | - \ / - | - \ | -
>  
> > | -
> > / | - | \ - | / - \ | / \ | - | /
>  
> > - \
> > | - / | \ / | \ - / \ - / | / \ /
>  
> > - \
> > / - \ | / - \ | \ - / \ - / | \ -
>  
> > \ /
> > | / \ | - \ | / \ / \ | - / \ / |
>  
> > - |
> > - | / \ / \ | / \ | / - | \ / \  
> > - / |
> > - | \ - / | - \ \ \ | - - / \ | \
> > \... done!
> > [ebuild     U ]
> > www-servers/apache-2.2.6-r7
> > [2.2.6-r5] USE="ssl
> > threads* -debug
> > -doc -ldap
> > (-selinux) -sni%
> > -static% -suexec%
> > (-mpm-event%) (-mpm-itk%)
> > (-mpm-peruser%)
> > (-mpm-prefork%)
> (-mpm-worker%)
> > (-no-suexec%)
> > (-static-modules%)"
> > APACHE2_MODULES="-actions%
> > -alias% -asis%
> > -auth_basic% -auth_digest%
> > -authn_alias% -authn_anon%
> > -authn_dbd% -authn_dbm%
> > -authn_default% -authn_file%
> > -authz_dbm% -authz_default%
> > -authz_groupfile%
> -authz_host%
> > -authz_owner% -authz_user%
> > -autoindex% -cache%
> > -cern_meta% -charset_lite%
> > -dav% -dav_fs%
> > -dav_lock% -dbd%
> > -deflate% -dir%
> > -disk_cache% -dumpio%
> > -env% -expires%
> > -ext_filter% -file_cache%
> > -filter% -headers%
> > -ident% -imagemap%
> > -include% -info%
> > -log_config% -log_forensic%
> > -logio% -mem_cache%
> > -mime% -mime_magic%
> > -negotiation% -proxy%
> > -proxy_ajp% -proxy_balancer%
> > -proxy_connect% -proxy_ftp%
> > -proxy_http% -rewrite%
> > -setenvif% -speling%
> > -status% -unique_id%
> > -userdir% -usertrack%
> > -version% -vhost_alias%"
> > APACHE2_MPMS="-event% -itk%
> > -peruser% -prefork%
> > -worker%" 0 kB
> > [ebuild  N    ]
> > app-admin/eselect-fontconfig-1.0  0 kB
> > [ebuild     U ]
> > media-libs/fontconfig-2.5.0-r1
> > [2.4.2] USE="-doc
> > -xml" 0 kB
> > [ebuild     U ]
> > app-text/ghostscript-gpl-8.61-r1
> > [8.60-r1] USE="cups
> > -X -bindist
> > -cjk -djvu
> > -gtk -jpeg2k" 0 kB
> >
> > Total: 4 packages (3 upgrades, 1 new), Size of downloads: 0 kB
> >
> >>>> Verifying ebuild Manifests...
> >>>> starting parallel fetching
> >
> >>>> Emerging (1 of 4)
> > www-servers/apache-2.2.6-r7 to /
> > ]0; >>> emerge (1 of 4) www-servers/apache-2.2.6-r7  
> > to /]0;emerge: (1
> > of 4) www-servers/apache-2.2.6-r7 Clean]0;emerge: (1 of 4)
> > www-servers/apache-2.2.6-r7 Compile *
> > httpd-2.2.6.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...
> >
> >             [ ok ] 
> > [39;49;00m
> >  * gentoo-apache-2.2.6-r7-20080107.tar.bz2
> RMD160
> > SHA1 SHA256 size ;-) ...
> >                           [
> > ok ]
> >  * checking ebuild checksums ;-) ...
> >
> >                        [
> > ok ]
> >  * checking auxfile checksums ;-) ...
> >
> >                        [
> > ok ]
> >  * checking miscfile checksums ;-) ...
> >
> >                        [
> > ok ]
> >  * checking httpd-2.2.6.tar.bz2 ;-) ...
> >
> >                        [
> > ok ]
> >  * checking
> gentoo-apache-2.2.6-r7-20080107.tar.bz2
> > ;-) ...
> >                         [
> > ok ]
> > *
> > * Selected default threaded MPM: worker
> > *
> > * Module 'authz_host' is required in the default apache
> > configuration.
> > * Module 'dir' is required in the default apache
> > configuration.
> > * Module 'mime' is required in the default apache
> > configuration.
> > *
> > * You have disabled one or more required modules
> > * for the default apache configuration.
> > * Although this is not an error, please be
> > * aware that this setup is UNSUPPORTED.
> > *
> > 
> >
> > Exiting on signal 2
> > ]0; ***
> >
> terminating.]0;root@:~/emerge-to-run]0;[EMAIL PROTECTED]:~/emerge-to- 
> > runwitness
> > emerge-to-run # cat /etc/make/.c  conf     .conf
> > # These settings were set by the catalyst build script that  
> > automatically
> > # built this stage.
> > # Please consult /etc/make.conf.example for a more detailed
> example.
> > CFLAGS="-O2 -march=i686 -pipe"
> > CXXFLAGS="${CFLAGS}"
> > # This should not be changed unless you know exactly what you are  
> > doing.
> > You
> > # should probably be using a different stage, instead.
> > CHOST="i686-pc-linux-gnu"
> >
> > GENTOO_MIRRORS="http://gentoo.osuosl.org/
> > ftp://distro.ibiblio.org/pub/linux/distributions/gentoo/
> > http://distro.ibiblio.org/pub/linux/distributions/gentoo/
> > ftp://ftp.gtlib.gatech.edu/pub/gentoo
> > http://www.gtlib.gatech.edu/pub/gentoo
> > ftp://mirror.iawnet.sandia.gov/pub/gentoo/
> > ftp://ftp.ussg.iu.edu/pub/linux/gentoo "
> >
> > SYNC="rsync://rsync.gentoo.org/gentoo-portage"
> >
> > MAKEOPTS="-j2"
> > FEATURES="parallel-fetch ccache"
> >
> > # Possible USE flags to add: ipv6 -selinux
> > USE="zlib nptl crypt ssl berkdb pam python perl mysql"
> >
> > APACHE2_MODULES="actions alias auth_basic auth_digest authn_anon
> > authn_dbd authn_dbm authn_default authn_file authz_dbm
> authz_default
> > authz_groupfile authz_host authz_owner authz_user autoindex cache
> dav
> > dav_fs dav_lock dbd deflate dir disk_cache doc env expires
> ext_filter
> > file_cache filter headers ident imagemap include info log_config
> logio
> > mem_cache mime mime_magic negotiation proxy proxy_ajp
> proxy_balancer
> > proxy_connect proxy_http rewrite setenvif so speling ssl status
> > unique_id userdir usertrack vhost_alias"
> > APACHE2_MODULES="mpm-worker"
> > ]0;[EMAIL PROTECTED]:~/emerge-to-runwitness
> emerge-to-run
> > # cat /etc/portage/mak   package.use | grep apache2
> > www-servers/apache apache2 ssl threads mime dir
> > authz_host dav dav_fs dav_lock auth_basic
> > dev-util/subversion apache2 python zlib nls berkdb
> > ]0;[EMAIL PROTECTED]:~/emerge-to-runwitness
> emerge-to-run
> > # exit
> > exit
> >
> > Script done on Sat Jan 26 17:44:49 2008
> > -- 
> > [email protected] mailing list
> >
> 
> --
> [email protected] mailing list
> 
> 

-- 
[email protected] mailing list

Reply via email to