080401 Dale wrote:
> W.Kenworthy wrote:
>> *-bank:1
>> description: DIMM DDR Synchronous 400 MHz (2.5 ns)
>> product: PartNum1
>> vendor: Manufacturer1
>> physical id: 1
>> serial: SerNum1
>> slot: DIMM1
>> size: 1GB
>> width: 64 bits
>> clock: 400MHz (2.5ns)
> That is not what mine shows tho. Nothing about speed there.
> *-bank:0
> description: DIMM
> physical id: 0
> slot: A0
> size: 512MB
When I run 'lshw', the memory lines come out as :
*-bank:0
description: DIMM Synchronous 1872 MHz (0.5 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 512MiB
width: 64 bits
clock: 1872MHz (0.5ns)
This looks like WK's output rather than Dale's more limited version.
It also doesn't match the spec of the memory when I bought it,
which I recorded in my own files as :
071009 Memory : Kingston 2 x 512 kit DDR2 1150 PC2 9200 : 124.99
The specs are at (they seem to have dropped the 512 MB version)
http://www.valueram.com/datasheets/KHX9200D2_1G.pdf
which seems to confirm my own record.
The speed was supposedly 1150 MHz , but 'lshw' gives 1872 MHz .
Of course, I'm not complaining if it's faster than advertised (smile),
but does anyone have any comments re the 2 differences in output ?
--
========================,,============================================
SUPPORT ___________//___, Philip Webb : [EMAIL PROTECTED]
ELECTRIC /] [] [] [] [] []| Centre for Urban & Community Studies
TRANSIT `-O----------O---' University of Toronto
--
[email protected] mailing list
