On Mon, 7 Apr 2008 00:07:58 +0200, Alan McKinnon wrote
> On Sunday 06 April 2008, pat wrote:
> > On Sun, 6 Apr 2008 23:16:54 +0200, Alan McKinnon wrote
> >
> > > On Sunday 06 April 2008, pat wrote:
> > > > Hello,
> > > >
> > > > I have a question about mounting disk image as the disk. I have
> > > > disk image which was created using:
> > > > dd if=/dev/sda of=./file.iso
> > > > and the sda contained two partitions sda1 and sda2. I know, that
> > > > if I have only image of the sda1 I can mount it using loop device
> > > > like #losetup /dev/loop0 file.iso
> > > > #mount -t ... /dev/loop0 /mnt/tmp
> > > >
> > > > But, how to do it if the file structure is: sda -> sda1, sda2? I
> > > > need to get data from sda1 and sda2 :-|
> > >
> > > losetup -o <offset_value> /dev/loop<something>
> > >
> > > see man losetup
> >
> > Thanks. How to count the offset? And where can I get the partitions
> > offsets?
>
> Is the original disk still intact? Then fdisk would tell you the offset
>
> --
> Alan McKinnon
> alan dot mckinnon at gmail dot com
>
> --
> [email protected] mailing list
Well, yes and no :-( The partition table of the original table has crashed, so
I've created the ISO image of the disk and now playing with it ... but, the
original drive is still untouched. So, I should play with hard drive directly
instead using the dd copy? To partition table recovery in the ISO image I've
used the testdisk utility.
Any suggestions?
Thanks a lot.
Pat
--
[email protected] mailing list
