On Sun, May 11, 2008 at 11:28 AM, Etaoin Shrdlu <[EMAIL PROTECTED]> wrote: > On Sunday 11 May 2008, 20:03, Mark Knecht wrote: > > Hi, > > In a machine with two NICs: > > > > 1) How do I configure which is considered eth0? > > Probably editing /etc/udev/rules.d/70-persistent-net.rules. > > > > 2) After drivers are loaded how do I see what hardware is using which > > driver? > > The above file should have a comment before each line indicating what > driver the device needs. Apart from that, you can probably peek > into /sys. On my system, there seems to exist a directory named > /sys/class/net/<device>/device/driver/module/drivers/pci\:<module>/, for > instance for eth0 it's > > /sys/class/net/eth0/device/driver/module/drivers/pci\:3c59x/ > > So I see that eth0 is using driver 3c59x. This is a totally homebrew > method, the result of 5-minute search, and most likely better method > exist (which I'd like to know too). > -- > [email protected] mailing list > >
Thanks. As per the note I sent a couple of minutes ago I found the persistant-net.rules file. I've modified it, rebooted and things are working as I want them to. eth0 is still IP address 192.168.1.57 but it's moved to the Intel e100 NIC. Other machine on my network can see it. Thanks for the pointer to the /sys/class stuff. I've only looked at that once trying to understand frame buffer stuff. This was a big help. With the changes I now see: /sys/class/net/eth0/device/driver/module/drivers/pci\:e100/ /sys/class/net/eth1/device/driver/module/drivers/pci\:3c59x/ which is what I want for now. Again, thanks for the great info. Cheers, Mark -- [email protected] mailing list
