Hey Guys, I'm trying to get a hypervisor running. I've installed Gentoo 64bit on a new(ish) HP XW6400. When booted with the minimal install CD, /proc/cpuinfo shows:
livecd ~ # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping : 6 cpu MHz : 2327.500 cache size : 4096 KB physical id : 3 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca lahf_lm bogomips : 4657.74 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: When running my Xen kernel (xen-sources 2.6.21), I get the following: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping : 6 cpu MHz : 2327.560 cache size : 4096 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu de tsc msr pae cx8 apic sep mtrr cmov pat clflush acpi mmx fxsr sse sse2 ss ht syscall nx lm constant_tsc pni ssse3 cx16 lahf_lm bogomips : 4657.82 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: I'm going slightly nuts here - I figure I've done something obvious wrong, but I can't think what. Any ideas/advice? Something I've missed in menuconfig? Cheers in advance! Paul -- [email protected] mailing list
