On Tue, Jul 29, 2008 at 3:42 PM, Daniel D Jones
<[EMAIL PROTECTED]> wrote:
> Anyone have a clue as to what would cause the following error:
>
>>>> Install sdl-perl-2.1.3-r3
> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
> WARNING: Can't figure out install path for types: arch lib
> Files will not be installed.
>
> The package is already installed, so it succeeded at one time, but
> revdep-rebuild wants to reinstall it and it keeps failing. I believe the
> above is the issue, but I'll paste the full output from the installation
> attempt below. There is also this error:
>
> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
>
> but the process appears to continue after that and I don't _think_ that's
> causing the ultimate failure.
>
> Thanks in advance for any assistance.
>
> -------------------------------------------------------------------------------------
>
> # emerge sdl-perl
> Calculating dependencies... done!
>>>> Verifying ebuild Manifests...
>
>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
> [ ok ]
> * checking ebuild checksums ;-) ...
> [ ok ]
> * checking auxfile checksums ;-) ...
> [ ok ]
> * checking miscfile checksums ;-) ...
> [ ok ]
> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
> [ ok ]
>>>> Unpacking source...
>>>> Unpacking SDL_Perl-2.1.3.tar.gz
> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
> * Applying sdl-2.1.3.build.patch ...
> [ ok ]
> * Applying sdl-perl-2.1.3-gfxPie.patch ...
> [ ok ]
>>>> Source unpacked.
>>>> Compiling source
> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
> * Using Module::Build
> Checking whether your kit is complete...
> Looks good
>
> Checking prerequisites...
> Looks good
>
> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
> Copying lib/SDL.pm -> blib/lib/SDL.pm
> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
> Copying src/SDL.xs -> ./SDL_perl.xs
> ./SDL_perl.xs -> ./SDL_perl.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_PNG
> -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE -DHAVE_SDL_GFX
> -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> ./SDL_perl.o ./SDL_perl.c
> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
> target type
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
> cc -shared -O2 -L/usr/local/lib -o
> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
> -lsmpeg -lSDL_mixer
> Copying src/SFont.xs -> SDL/SFont.xs
> SDL/SFont.xs -> SDL/SFont.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1
> -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/SFont.o SDL/SFont.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
> Copying src/OpenGL.xs -> SDL/OpenGL.xs
> SDL/OpenGL.xs -> SDL/OpenGL.c
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
> line 2101.
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
> line 2101.
> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/OpenGL.o SDL/OpenGL.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
> blib/libdoc/SDL::Tutorial::Animation.3
> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
> Manifying blib/lib/SDL/Tutorial/Images.pm ->
> blib/libdoc/SDL::Tutorial::Images.3
> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
> blib/libdoc/SDL::Tutorial::Drawing.3
> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>> Source compiled.
>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>
>>>> Install sdl-perl-2.1.3-r3
> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
> WARNING: Can't figure out install path for types: arch lib
> Files will not be installed.
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
> * Cleaning out stray man files
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
>
> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
> #
>
>
Can you give us the output of emerge --debug
>
> -------------------------------------------------------------------------------------
>
> # emerge sdl-perl
> Calculating dependencies... done!
>>>> Verifying ebuild Manifests...
>
>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
> [ ok ]
> * checking ebuild checksums ;-) ...
> [ ok ]
> * checking auxfile checksums ;-) ...
> [ ok ]
> * checking miscfile checksums ;-) ...
> [ ok ]
> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
> [ ok ]
>>>> Unpacking source...
>>>> Unpacking SDL_Perl-2.1.3.tar.gz
> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
> * Applying sdl-2.1.3.build.patch ...
> [ ok ]
> * Applying sdl-perl-2.1.3-gfxPie.patch ...
> [ ok ]
>>>> Source unpacked.
>>>> Compiling source
> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
> * Using Module::Build
> Checking whether your kit is complete...
> Looks good
>
> Checking prerequisites...
> Looks good
>
> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
> Copying lib/SDL.pm -> blib/lib/SDL.pm
> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
> Copying src/SDL.xs -> ./SDL_perl.xs
> ./SDL_perl.xs -> ./SDL_perl.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_PNG
> -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE -DHAVE_SDL_GFX
> -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> ./SDL_perl.o ./SDL_perl.c
> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
> target type
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
> cc -shared -O2 -L/usr/local/lib -o
> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
> -lsmpeg -lSDL_mixer
> Copying src/SFont.xs -> SDL/SFont.xs
> SDL/SFont.xs -> SDL/SFont.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1
> -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/SFont.o SDL/SFont.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
> Copying src/OpenGL.xs -> SDL/OpenGL.xs
> SDL/OpenGL.xs -> SDL/OpenGL.c
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
> line 2101.
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
> line 2101.
> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/OpenGL.o SDL/OpenGL.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
> blib/libdoc/SDL::Tutorial::Animation.3
> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
> Manifying blib/lib/SDL/Tutorial/Images.pm ->
> blib/libdoc/SDL::Tutorial::Images.3
> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
> blib/libdoc/SDL::Tutorial::Drawing.3
> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>> Source compiled.
>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>
>>>> Install sdl-perl-2.1.3-r3
> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
> WARNING: Can't figure out install path for types: arch lib
> Files will not be installed.
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
> * Cleaning out stray man files
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
>
> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
> #
>
>
Can you give us the output of emerge --debug
>
> -------------------------------------------------------------------------------------
>
> # emerge sdl-perl
> Calculating dependencies... done!
>>>> Verifying ebuild Manifests...
>
>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
> [ ok ]
> * checking ebuild checksums ;-) ...
> [ ok ]
> * checking auxfile checksums ;-) ...
> [ ok ]
> * checking miscfile checksums ;-) ...
> [ ok ]
> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
> [ ok ]
>>>> Unpacking source...
>>>> Unpacking SDL_Perl-2.1.3.tar.gz
> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
> * Applying sdl-2.1.3.build.patch ...
> [ ok ]
> * Applying sdl-perl-2.1.3-gfxPie.patch ...
> [ ok ]
>>>> Source unpacked.
>>>> Compiling source
> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
> * Using Module::Build
> Checking whether your kit is complete...
> Looks good
>
> Checking prerequisites...
> Looks good
>
> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
> Copying lib/SDL.pm -> blib/lib/SDL.pm
> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
> Copying src/SDL.xs -> ./SDL_perl.xs
> ./SDL_perl.xs -> ./SDL_perl.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_PNG
> -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE -DHAVE_SDL_GFX
> -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> ./SDL_perl.o ./SDL_perl.c
> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
> target type
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
> cc -shared -O2 -L/usr/local/lib -o
> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
> -lsmpeg -lSDL_mixer
> Copying src/SFont.xs -> SDL/SFont.xs
> SDL/SFont.xs -> SDL/SFont.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1
> -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/SFont.o SDL/SFont.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
> Copying src/OpenGL.xs -> SDL/OpenGL.xs
> SDL/OpenGL.xs -> SDL/OpenGL.c
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
> line 2101.
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
> line 2101.
> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/OpenGL.o SDL/OpenGL.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
> blib/libdoc/SDL::Tutorial::Animation.3
> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
> Manifying blib/lib/SDL/Tutorial/Images.pm ->
> blib/libdoc/SDL::Tutorial::Images.3
> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
> blib/libdoc/SDL::Tutorial::Drawing.3
> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>> Source compiled.
>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>
>>>> Install sdl-perl-2.1.3-r3
> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
> WARNING: Can't figure out install path for types: arch lib
> Files will not be installed.
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
> * Cleaning out stray man files
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
>
> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
> #
>
>
Can you give us the output of emerge --debug
>
> -------------------------------------------------------------------------------------
>
> # emerge sdl-perl
> Calculating dependencies... done!
>>>> Verifying ebuild Manifests...
>
>>>> Emerging (1 of 1) dev-perl/sdl-perl-2.1.3-r3 to /
> * SDL_Perl-2.1.3.tar.gz RMD160 SHA1 SHA256 size ;-) ...
> [ ok ]
> * checking ebuild checksums ;-) ...
> [ ok ]
> * checking auxfile checksums ;-) ...
> [ ok ]
> * checking miscfile checksums ;-) ...
> [ ok ]
> * checking SDL_Perl-2.1.3.tar.gz ;-) ...
> [ ok ]
>>>> Unpacking source...
>>>> Unpacking SDL_Perl-2.1.3.tar.gz
> to /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work
> * Applying sdl-2.1.3.build.patch ...
> [ ok ]
> * Applying sdl-perl-2.1.3-gfxPie.patch ...
> [ ok ]
>>>> Source unpacked.
>>>> Compiling source
> in /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/work/SDL_Perl-2.1.3 ...
> * Using Module::Build
> Checking whether your kit is complete...
> Looks good
>
> Checking prerequisites...
> Looks good
>
> Creating new 'Build' script for 'SDL_Perl' version '2.1.3'
> Copying lib/SDL/Tutorial/Animation.pm -> blib/lib/SDL/Tutorial/Animation.pm
> Copying lib/SDL/Surface.pm -> blib/lib/SDL/Surface.pm
> Copying lib/SDL/Rect.pm -> blib/lib/SDL/Rect.pm
> Copying lib/SDL/Palette.pm -> blib/lib/SDL/Palette.pm
> Copying lib/SDL/MPEG.pm -> blib/lib/SDL/MPEG.pm
> Copying lib/SDL/SFont.pm -> blib/lib/SDL/SFont.pm
> Copying lib/SDL/Tool/Graphic.pm -> blib/lib/SDL/Tool/Graphic.pm
> Copying lib/SDL/Tutorial/Drawing.pm -> blib/lib/SDL/Tutorial/Drawing.pm
> Copying lib/SDL/Cursor.pm -> blib/lib/SDL/Cursor.pm
> Copying lib/SDL/Video.pm -> blib/lib/SDL/Video.pm
> Copying lib/SDL/Event.pm -> blib/lib/SDL/Event.pm
> Copying lib/SDL/Tutorial.pm -> blib/lib/SDL/Tutorial.pm
> Copying lib/SDL/Mixer.pm -> blib/lib/SDL/Mixer.pm
> Copying lib/SDL/Sound.pm -> blib/lib/SDL/Sound.pm
> Copying lib/SDL/OpenGL.pm -> blib/lib/SDL/OpenGL.pm
> Copying lib/SDL.pm -> blib/lib/SDL.pm
> Copying lib/SDL/Font.pm -> blib/lib/SDL/Font.pm
> Copying lib/SDL/Timer.pm -> blib/lib/SDL/Timer.pm
> Copying lib/SDL/Music.pm -> blib/lib/SDL/Music.pm
> Copying lib/SDL/OpenGL/Constants.pm -> blib/lib/SDL/OpenGL/Constants.pm
> Copying lib/SDL/Color.pm -> blib/lib/SDL/Color.pm
> Copying lib/SDL/Config.pm -> blib/lib/SDL/Config.pm
> Copying lib/SDL/Tool/Font.pm -> blib/lib/SDL/Tool/Font.pm
> Copying lib/SDL_perl.pm -> blib/lib/SDL_perl.pm
> Copying lib/SDL/Cdrom.pm -> blib/lib/SDL/Cdrom.pm
> Copying lib/SDL/Tutorial/Images.pm -> blib/lib/SDL/Tutorial/Images.pm
> Copying lib/SDL/App.pm -> blib/lib/SDL/App.pm
> Copying lib/SDL/TTFont.pm -> blib/lib/SDL/TTFont.pm
> Copying lib/SDL/Constants.pm -> blib/lib/SDL/Constants.pm
> Copying src/SDL.xs -> ./SDL_perl.xs
> ./SDL_perl.xs -> ./SDL_perl.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include -I/usr/include/smpeg
> -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_PNG
> -DHAVE_SDL -DHAVE_SDL_TTF -DHAVE_SDL_NET -DHAVE_SDL_IMAGE -DHAVE_SDL_GFX
> -DHAVE_JPEG -DHAVE_SMPEG -DHAVE_SDL_MIXER -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> ./SDL_perl.o ./SDL_perl.c
> ./SDL_perl.xs: In function 'XS_SDL_NetResolveIP':
> ./SDL_perl.xs:2449: warning: assignment discards qualifiers from pointer
> target type
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL_perl/SDL_perl.bs')
> cc -shared -O2 -L/usr/local/lib -o
> blib/arch/auto/SDL_perl/SDL_perl.so ./SDL_perl.o -L/usr/lib -L/usr/X11R6/lib
> -lSDL -lpthread -lpng -lSDL -lSDL_ttf -lSDL_net -lSDL_image -lSDL_gfx -ljpeg
> -lsmpeg -lSDL_mixer
> Copying src/SFont.xs -> SDL/SFont.xs
> SDL/SFont.xs -> SDL/SFont.c
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/include/SDL -I/usr/include/SDL -D_GNU_SOURCE=1
> -D_REENTRANT -DHAVE_SDL_IMAGE -DHAVE_SDL -fPIC -c -fno-strict-aliasing -pipe
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/SFont.o SDL/SFont.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/SFont/SFont.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/SFont/SFont.so
> SDL/SFont.o -L/usr/lib -lSDL -lpthread -lSDL_image -lSDL
> Copying src/OpenGL.xs -> SDL/OpenGL.xs
> SDL/OpenGL.xs -> SDL/OpenGL.c
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 682, <GEN25>
> line 2101.
> Use of uninitialized value within %ExtUtils::ParseXS::type_kind in hash
> element at /usr/local/lib/perl5/5.10.0/ExtUtils/ParseXS.pm line 747, <GEN25>
> line 2101.
> Error: 'GLint' not in typemap in OpenGL.xs, line 2099
> cc -I/usr/local/lib/perl5/5.10.0/x86_64-linux/CORE -DXS_VERSION="2.1.3"
> -DVERSION="2.1.3" -fPIC -I/usr/X11R6/include/GL -I/usr/include/SDL
> -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -DHAVE_GL -DHAVE_SDL
> -DHAVE_GLU -fPIC -c -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE
> -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -o
> SDL/OpenGL.o SDL/OpenGL.c
> ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/SDL/OpenGL/OpenGL.bs')
> cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/SDL/OpenGL/OpenGL.so
> SDL/OpenGL.o -L/usr/lib -L/usr/X11R6/lib -lSDL -lpthread -lGL -lSDL -lGLU
> Manifying blib/lib/SDL/MPEG.pm -> blib/libdoc/SDL::MPEG.3
> Manifying blib/lib/SDL/Tutorial/Animation.pm ->
> blib/libdoc/SDL::Tutorial::Animation.3
> Manifying blib/lib/SDL/Event.pm -> blib/libdoc/SDL::Event.3
> Manifying blib/lib/SDL/Font.pm -> blib/libdoc/SDL::Font.3
> Manifying blib/lib/SDL/Surface.pm -> blib/libdoc/SDL::Surface.3
> Manifying blib/lib/SDL/Rect.pm -> blib/libdoc/SDL::Rect.3
> Manifying blib/lib/SDL/Cdrom.pm -> blib/libdoc/SDL::Cdrom.3
> Manifying blib/lib/SDL/Tutorial/Images.pm ->
> blib/libdoc/SDL::Tutorial::Images.3
> Manifying blib/lib/SDL/Music.pm -> blib/libdoc/SDL::Music.3
> Manifying blib/lib/SDL/Mixer.pm -> blib/libdoc/SDL::Mixer.3
> Manifying blib/lib/SDL/Timer.pm -> blib/libdoc/SDL::Timer.3
> Manifying blib/lib/SDL/Tutorial.pm -> blib/libdoc/SDL::Tutorial.3
> Manifying blib/lib/SDL/TTFont.pm -> blib/libdoc/SDL::TTFont.3
> Manifying blib/lib/SDL/Cursor.pm -> blib/libdoc/SDL::Cursor.3
> Manifying blib/lib/SDL/Tutorial/Drawing.pm ->
> blib/libdoc/SDL::Tutorial::Drawing.3
> Manifying blib/lib/SDL.pm -> blib/libdoc/SDL.3
> Manifying blib/lib/SDL/Color.pm -> blib/libdoc/SDL::Color.3
> Manifying blib/lib/SDL/Palette.pm -> blib/libdoc/SDL::Palette.3
> Manifying blib/lib/SDL/Sound.pm -> blib/libdoc/SDL::Sound.3
> Manifying blib/lib/SDL/SFont.pm -> blib/libdoc/SDL::SFont.3
> Manifying blib/lib/SDL/Tool/Graphic.pm -> blib/libdoc/SDL::Tool::Graphic.3
> Manifying blib/lib/SDL/Tool/Font.pm -> blib/libdoc/SDL::Tool::Font.3
> Manifying blib/lib/SDL/OpenGL.pm -> blib/libdoc/SDL::OpenGL.3
> Manifying blib/lib/SDL/Video.pm -> blib/libdoc/SDL::Video.3
> Manifying blib/lib/SDL/App.pm -> blib/libdoc/SDL::App.3
>>>> Source compiled.
>>>> Test phase [not enabled]: dev-perl/sdl-perl-2.1.3-r3
>
>>>> Install sdl-perl-2.1.3-r3
> into /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/ category dev-perl
> WARNING: Can't figure out install path for types: arch lib
> Files will not be installed.
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::SFont.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Surface.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Animation.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Palette.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Event.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Color.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::OpenGL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Timer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Graphic.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cursor.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::MPEG.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Music.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tool::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Cdrom.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Drawing.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::App.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Tutorial::Images.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Rect.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Mixer.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Video.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Font.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::Sound.3
> Installing
> /var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/image/usr/local/man/man3/SDL::TTFont.3
> * Cleaning out stray man files
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
>
> * Messages for package dev-perl/sdl-perl-2.1.3-r3:
>
> *
> * ERROR: dev-perl/sdl-perl-2.1.3-r3 failed.
> * Call stack:
> * ebuild.sh, line 49: Called src_install
> * environment, line 2324: Called die
> * The specific snippet of code:
> * die "failed to install properly";
> * The die message:
> * failed to install properly
> *
> * If you need support, post the topmost build error, and the call stack if
> relevant.
> * A complete build log is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/build.log'.
> * The ebuild environment file is located
> at '/var/tmp/portage/dev-perl/sdl-perl-2.1.3-r3/temp/environment'.
> *
> #
>
>
Can you give us the output of emerge --debug sdl-perl ? Can you verify
that you can successfully install other perl apps like perl-tk or
something else in the dev-perl category?
