Hello,
I have a 4M sandisk card and need advice on what to put
in the /etc/conf.d/hdparm file.
Here's the hardware
CompactFlash ATA device
Model Number: SanDisk SDCFB-4096
Serial Number: 003416B2397F2159
Firmware Revision: HDX 4.03
Standards:
Supported: 4
Likely used: 4
Configuration:
Logical max current
cylinders 7964 7964
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 8027712
LBA user addressable sectors: 8027712
device size with M = 1024*1024: 3919 MBytes
device size with M = 1000*1000: 4110 MBytes (4 GB)
Capabilities:
LBA, IORDY(may be)(cannot be disabled)
Standby timer values: spec'd by Vendor
R/W multiple sector transfer: Max = 4 Current = 4
DMA: mdma0 mdma1 mdma2 (?)
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* CFA feature set
Any suggestion as to what to put in the /etc/conf.d/hdparm file are
most welcome.
It's running gentoo just fine with the default entries....
