Nikos Chantziaras <[EMAIL PROTECTED]> writes:
>> [...]
>> mptbase: ioc0: Initiating bringup
>> ioc0: LSI53C1030 B0: Capabilities={Initiator}
>> scsi4 : ioc0: LSI53C1030 B0, FwRev=00000000h, Ports=1, MaxQ=128, IRQ=16
>
> That's an LSI Fusion-MPT controller. Enable:
>
> Device Drivers->[*] Fusion MPT device support->
> <*> Fusion MPT ScsiHost drivers for SPI
>
> Reboot. Have fun :P
I don't think thats the trouble... that has been enabled in every
kernel compile I've run trying to get a working config.
The original setup was rigged to boot with an initrd. How can I take
that initrd apart and see if there is some trick driver built into
it.
