On Monday 11 May 2009 11:06:20 Raul Gonzales wrote: > Hi all, > > I've found that when I run ip link show on my box it gives me: > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 brd 127.255.255.255 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UP qlen 100 > link/ether 00:0d:60:91:03:1f brd ff:ff:ff:ff:ff:ff > inet 192.168.1.11/24 brd 192.168.1.255 scope global eth0 > inet6 fe80::20d:60ff:fe91:31f/64 scope link > valid_lft forever preferred_lft forever > 3: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN > link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff > 4: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN > link/ether 8a:3c:77:a9:b5:c0 brd ff:ff:ff:ff:ff:ff > 5: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN qlen 32 > link/ether 8e:cf:e3:61:30:ea brd ff:ff:ff:ff:ff:ff > 6: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN qlen 32 > link/ether 8e:ba:b0:96:8e:d7 brd ff:ff:ff:ff:ff:ff > 7: teql0: <NOARP> mtu 1500 qdisc noop state DOWN qlen 100 > link/void > 8: tunl0: <NOARP> mtu 1480 qdisc noop state DOWN > link/ipip 0.0.0.0 brd 0.0.0.0 > 9: gre0: <NOARP> mtu 1476 qdisc noop state DOWN > link/gre 0.0.0.0 brd 0.0.0.0 > 10: sit0: <NOARP> mtu 1480 qdisc noop state DOWN > link/sit 0.0.0.0 brd 0.0.0.0 > > > but I expected only lo and eth0 as I did not configured the others. How > could I get rid of the rest of interfaces?
Seems like you have a truck load of kernel modules loaded that you don't use. Stop those modules from loading, or just don't load them until you really do need them. -- alan dot mckinnon at gmail dot com
