On Thu, Aug 20, 2009 at 3:42 PM, Dale<[email protected]> wrote: > Yoav Luft wrote: >> Hi, >> I got a Dell Vostro 1520 laptop as a present, and I am trying to build >> a kernel for it. I can't determine what hardware I've got on it, since >> the specs >> (http://support.dell.com/support/edocs/systems/vos1520/en/SM/specs.htm) >> say it could be installed in a few different configurations. What >> drivers do I need the bluetooth (connected by a mini-card, don't know >> what it means), touchpad, camera and fingerprint (if there are any, of >> course)? >> I tried 'lspci', it gave me no clue regarding the above hardware and >> is as follow: >> 00:00.0 Host bridge: Intel Corporation Unknown device 2a40 (rev 07) >> 00:02.0 VGA compatible controller: Intel Corporation Unknown device >> 2a42 (rev 07) >> 00:02.1 Display controller: Intel Corporation Unknown device 2a43 (rev 07) >> 00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 03) >> 00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 03) >> 00:1a.2 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 03) >> 00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 03) >> 00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 03) >> 00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 03) >> 00:1c.1 PCI bridge: Intel Corporation PCI Express Port 2 (rev 03) >> 00:1c.2 PCI bridge: Intel Corporation PCI Express Port 3 (rev 03) >> 00:1c.3 PCI bridge: Intel Corporation PCI Express Port 4 (rev 03) >> 00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 03) >> 00:1c.5 PCI bridge: Intel Corporation PCI Express Port 6 (rev 03) >> 00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 03) >> 00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 03) >> 00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 03) >> 00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 03) >> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) >> 00:1f.0 ISA bridge: Intel Corporation Unknown device 2919 (rev 03) >> 00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev >> 03) >> 00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 03) >> 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >> RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) >> 0e:00.0 Network controller: Broadcom Corporation BCM4310 USB Controller (rev >> 01) >> 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Unknown device 10f7 (rev 01) >> 1a:00.1 Class 0805: O2 Micro, Inc. Unknown device 8120 (rev 01) >> 1a:00.2 Mass storage controller: O2 Micro, Inc. Unknown device 8130 (rev 01) >> >> any help would be appreciated. >> >> >> > > Try the command lspci -v from the install CD and see what drivers the CD > uses. That is assuming you can boot the CD and it works of course. > > If the output is to large, most likely it will be, try this: lspci -v | > less . You can replace less with more if you prefer.
Or "lspci -k" which will tell you which kernel module is in use by each device. :)
