New York Times
January 6, 2013
Pulling Carbon Dioxide Out of Thin Air
By ANNE EISENBERG

¶ WHETHER streaming from the tailpipes of cars or the smokestacks of so many 
power plants and factories, carbon dioxide emissions keep growing around the 
globe.

¶ Now a Canadian company has developed a cleansing technology that may one day 
capture and remove some of this heat-trapping gas directly from the sky. And it 
is even possible that the gas could then be sold for industrial use.

¶ Carbon Engineering, formed in 2009 with $3.5 million from Bill Gates and 
others, created prototypes for parts of its cleanup system in 2011 and 2012 at 
its plant in Calgary, Alberta. The company, which recently closed a $3 million 
second round of financing, plans to build a complete pilot plant by the end of 
2014 for capturing carbon dioxide from the atmosphere, said David Keith, its 
president and a Harvard professor who has long been interested in climate 
issues.

¶ The carbon-capturing tools that Carbon Engineering and other companies are 
designing have made great strides in the last two years, said Timothy A. Fox, 
head of energy and environment at the Institution of Mechanical Engineers in 
London.

¶ “The technology has moved from a position where people talked about the 
potential and possibilities to a point where people like David Keith are 
testing prototype components and producing quite detailed designs and 
engineering plans,” Dr. Fox said. “Carbon Engineering is the leading contender 
in this field at this moment for putting an industrial-scale machine together 
and getting it working.”

¶ Should the cost of capturing carbon dioxide fall low enough, the gas would 
have many customers, he predicted. Chief among them, he said, would be the oil 
industry, which buys the gas to inject into oil fields to force out extra oil. 
The injection has minimal risk, said Howard J. Herzog, a senior research 
engineer at the Massachusetts Institute of Technology. “The enhanced oil 
recovery industry has put tens of millions of tons of carbon dioxide into the 
ground every year for decades with no problems,” he said.

¶ Much of the carbon dioxide for enhanced oil recovery comes from naturally 
occurring underground reserves that are piped to oil fields, said Sasha 
Mackler, vice president of Summit Carbon Capture, a unit of Summit Power Group 
in Seattle. Summit Carbon Capture harvests carbon dioxide gas from coal and 
natural gas-burning plants before it can be spewed into the air.

¶ The global demand for carbon dioxide will only grow as oil becomes scarcer 
and demands for transportation fuel rise, Mr. Mackler said. Direct capture from 
the atmosphere would offer another source for the gas.

¶ Yet the cost of capturing carbon dioxide directly from the air has yet to be 
demonstrated, said Alain Goeppert, a senior research scientist at the Loker 
Hydrocarbon Research Institute at the University of Southern California. Dr. 
Goeppert recently reviewed the literature of air capture technology.

¶ “There is a lot of speculation of how much it will actually cost,” he said, 
with estimates from $20 a ton to as much as $2,000. “We won’t know for sure 
until someone builds a pilot plant.” (An average passenger vehicle generates 
about five tons of carbon dioxide a year.)

¶ Dr. Keith says he thinks it may be possible to lower the cost of capture 
toward $100 a ton as the company grows.

¶ Carbon Engineering’s machines use a carbon-dioxide-absorbing solution of 
caustic soda to remove the gas from the air. “The issue at the pilot plant,” 
Dr. Keith said, “will be to test the equipment at the scale the vendors tell us 
they need” to provide performance guarantees for a full commercial plant. The 
process is intended to collect at least 100,000 tons a year of the gas.

¶ The concentration of carbon dioxide scrubbed from the flue gases of coal- and 
gas-fired power plants is about 5 percent to 15 percent higher than that in the 
air, where it is about 393 parts per million. “You have to handle much larger 
volumes of gases” to capture the same amount of carbon dioxide from the air 
that you would from power plant flue gases, Dr. Goeppert said. “But Dr. Keith 
is going to be able to capture it with the absorbent he uses.”

¶ The recovered carbon dioxide may be sold one day, not only for enhanced oil 
recovery, but also to feed algae to produce biofuel. It may also be sequestered 
in places like unmineable coal seams and oil and gas reservoirs, says a new 
Energy Department report.

¶ Gas capture would be extremely important in developing a rational price for 
carbon emissions, said Dr. Fox of the British mechanical engineering society. 
“Whatever it costs to take it out of the air and store it away,” Dr. Fox said, 
“that’s the price polluters would pay if they want to put carbon into the air.”

¶ Another advantage of direct air capture is geographic flexibility. “It 
doesn’t matter where you take the carbon dioxide out,” he said, since the gas 
is mixed evenly in the earth’s atmosphere. “You could have air capture machines 
in the Australian desert to account for New York City car emissions.”

¶ Most important, air capture could be used to get rid of that last fraction of 
carbon dioxide that escapes into the air, for example, even from power plants 
outfitted to collect most of their emissions, said Klaus S. Lackner, a Columbia 
professor and a board member and adviser to Kilimanjaro Energy, another company 
working on collecting atmospheric carbon dioxide.

¶ “I see direct air capture as the long-term way of dealing with all those 
emissions that can’t be dealt with in any other way,” he said.

-- 
You received this message because you are subscribed to the Google Groups 
"geoengineering" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/geoengineering?hl=en.

Reply via email to