Brent and Jim,
Thank you for your replies.
I am using MapCache to serve out imagery in Web Mercator
(GoogleBingArcGISCompatible). The Web Mercator tiles are working correctly in
ArcGIS as well as QGIS when using WMTS. Unfortunately, I am still having a
couple issues:
Issue 1:
*GeoMOOSE is requesting a tile that it out of range. I am not sure what is
causing this issue:
GeoMOOSE is working with other XYZ tile servers such as OpenLayers.
MapCache is working with ArcGIS and QGIS clients.
The tiles requested and served are 256*256.
I think the tiles should be working however I am still getting an error
that my tiles are out of range even after I checked to make sure that I did not
swap the X and Y. One error is that MapCache is reporting tile y=189759 is not
within 334028 to 334954.
Issue 2:
*Firefox is reporting that a cross-origin request is blocked.
Please let me know if you might know how I can fix these problems. For
reference I the public server and configuration information is below.
Thank You!
The public server is:
https://geomoose.lyonco.org/lyonmapcache/tms/1.0.0/LyonPictoPhotos2020@GoogleBingArcGISCompatible/
GeoMOOSE Configuration:
<map-source name="Picto2020BackgroundTMS" type="xyz" transitionEffect="resize">
<layer name="LyonPictoPhotos2020"/>
<url>https://geomoose.lyonco.org/lyonmapcache/tms/1.0.0/LyonPictoPhotos2020@GoogleBingArcGISCompatible/{z}/{y}/{x}.jpg</url>
<type>"jpeg"</type>
</map-source>
MapCache Configuration:
<grid name="GoogleBingArcGISCompatible">
<metadata>
<title>GoogleBingArcGISCompatible</title>
<WellKnownScaleSet>urn:ogc:def:wkss:OGC:1.0:GoogleMapsCompatible</WellKnownScaleSet>
</metadata>
<extent>-20037508.3427892480 -20037508.3427892480 20037508.3427892480
20037508.3427892480</extent>
<srs>EPSG:3857</srs>
<srsalias>EPSG:900913</srsalias>
<units>m</units>
<size>256 256</size>
<resolutions>156543.0339280410 78271.51696402048 39135.75848201023
19567.87924100512 9783.939620502561 4891.969810251280 2445.984905125640
1222.992452562820 611.4962262814100 305.7481131407048 152.8740565703525
76.43702828517624 38.21851414258813 19.10925707129406 9.554628535647032
4.777314267823516 2.388657133911758 1.194328566955879 0.5971642834779395
0.29858214173896975 0.149291070869484875</resolutions>
</grid>
-----Original Message-----
From: Geomoose-users <[email protected]> On Behalf Of
[email protected]
Sent: Friday, December 17, 2021 2:10 PM
To: [email protected]
Subject: Geomoose-users Digest, Vol 124, Issue 6
Caution:
This email was sent from an external account. If you were expecting an internal
email you would not see this notice. Please exercise caution before clicking on
any links. Report any suspicious email to the Help Desk.
Question Everything: Were you expecting this email?
________________________________
Send Geomoose-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://linkprotect.cudasvc.com/url?a=https%3a%2f%2flists.osgeo.org%2fmailman%2flistinfo%2fgeomoose-users&c=E,1,74QPL10lc3lvjBIAKpTYU4U6ANmKCyHwwPDfzF7xO7hTRA07Akcpei38OQtBsHdxG4mFl407Pf__gPlOrHZHs3b2Lvqu1N5Y7iOlZ_mV_EkMNA,,&typo=1
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific than "Re:
Contents of Geomoose-users digest..."
Today's Topics:
1. Re: TMS layers in GeoMOOSE 3.x (Jim Klassen)
2. Re: TMS layers in GeoMOOSE 3.x (Brent Fraser)
----------------------------------------------------------------------
Message: 1
Date: Fri, 17 Dec 2021 14:01:42 -0600
From: Jim Klassen <[email protected]>
To: [email protected]
Subject: Re: [Geomoose-users] TMS layers in GeoMOOSE 3.x
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
The part I'm not sure about is if there is still support for custom tile
grids.? At first glance it looks like only the default grid is supported (I
don't see anything in GeoMoose 3 to override the OpenLayers tileGridFunction or
specify a different tileGrid).
On 12/16/21 12:42 PM, Brent Fraser wrote:
> Hi Mark.
>
> ? i did some TMS testing a while back and used:
>
> ? <!-- - - - - - - - ?TYPE = "xyz -> TMS" ? - - - - - - - - - - - -
> --> ? ? <map-source name="TMS-tile" type="xyz"> ? ? ? ? <layer
> name="imagery"/>
> <url>http://localhost/gm3-demo-data/demo/tiles/TMS/MNDAKO075061_s3/{z}
> /{x}/{-y}.png</url>
> ? ? </map-source>
>
> ? Note the *{-y}* . ?And the tiles I used are not in the standard gm3
> demo data; I just put my test data there on my local machine.
>
> Best Regards,
> Brent Fraser
>
> ----------------------------------------------------------------------
> --
> *From*: "Mark Volz" <[email protected]>
> *Sent*: 12/16/21 11:12 AM
> *To*: "[email protected]"
> <[email protected]>
> *Subject*: [Geomoose-users] TMS layers in GeoMOOSE 3.x
>
> Hello,
>
> Can we add TMS layers to GeoMOOSE 3.x? In the older version of
> GeoMOOSE I had used TMS to connect to MapCache. ?Please let me know if
> I can access TMS layers and if I should do something different.
>
> Thank You
>
> GM 2.x code to access TMS:
>
> <map-source name="Picto2020BackgroundTMS" type="tms"
> projection="EPSG:103749" tiled="true" width="512" height="512"
> units="ft" transitionEffect="resize" tileOrigin="new
> OpenLayers.LonLat(436450.000000,80000.000000)">
>
> ? ? ? ? <layer name="LyonPictoPhotos2020"/>
>
> <url>https://linkprotect.cudasvc.com/url?a=https%3a%2f%2fgeomoose.lyon
> co.org%2flyonmapcache%2ftms%2f&c=E,1,nNyoTdjfh9RgVdK3lApzcY6XMoRLXk12X
> 1WXLh3mDHulGL6EyFv2M47nK--AfakjJnZnGBqli8bfP4_LsuAuwmmlG4z3u1j2P_8MJz0
> ONeM,&typo=1</url>
>
> <type>"jpg"</type>
>
> </map-source>
>
> Sincerely,
>
> *Mark Volz, GISP*
>
>
> _______________________________________________
> Geomoose-users mailing list
> [email protected]
> https://linkprotect.cudasvc.com/url?a=https%3a%2f%2flists.osgeo.org%2f
> mailman%2flistinfo%2fgeomoose-users&c=E,1,cP5G0bOCRu16ZgLg2vRBUz7hCLHV
> fGqsfr-6L2BquHZ5L5c-PGjFBUwHCqZFF1z7244NYUfarp_EXZAiXA3lU6ItkyurftuojZ
> qRd6Gun3FDE_Hbr9-NsK8sHA,,&typo=1
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://linkprotect.cudasvc.com/url?a=http%3a%2f%2flists.osgeo.org%2fpipermail%2fgeomoose-users%2fattachments%2f20211217%2f549ddc95%2fattachment-0001.html&c=E,1,FZQdRXm11FQiRG2NSuIlnXZoboLvpT1KdzcXL4EDU1PqyfOHSEmtz91kIrXd0y2ZQqKrCRbFkwxZXQ4mBwLqNaVz3oI3LelhzVclUDsDooqkYuEj2xJAi4EKx1U,&typo=1>
------------------------------
Message: 2
Date: Fri, 17 Dec 2021 13:09:26 -0700
From: "Brent Fraser" <[email protected]>
To: "Jim Klassen" <[email protected]>,
<[email protected]>
Subject: Re: [Geomoose-users] TMS layers in GeoMOOSE 3.x
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
Yeah, I didn't test custom tile schemes; I was happy to see standard Web
Mercator TMS work.
----------------------------------------
From: "Jim Klassen" <[email protected]>
Sent: 12/17/21 1:02 PM
To: [email protected]
Subject: Re: [Geomoose-users] TMS layers in GeoMOOSE 3.x
The part I'm not sure about is if there is still support for custom tile grids.
At first glance it looks like only the default grid is supported (I don't see
anything in GeoMoose 3 to override the OpenLayers tileGridFunction or specify a
different tileGrid).
On 12/16/21 12:42 PM, Brent Fraser wrote:
Hi Mark.
i did some TMS testing a while back and used:
<!-- - - - - - - - TYPE = "xyz -> TMS" - - - - - - - - - - - - -->
<map-source name="TMS-tile" type="xyz">
<layer name="imagery"/>
<url>http://localhost/gm3-demo-data/demo/tiles/TMS/MNDAKO075061_s3/{z}/{x}/{-y}.png</url>
</map-source>
Note the {-y} . And the tiles I used are not in the standard gm3 demo data; I
just put my test data there on my local machine.
Best Regards,
Brent Fraser
----------------------------------------
From: "Mark Volz" <[email protected]>
Sent: 12/16/21 11:12 AM
To: "[email protected]" <[email protected]>
Subject: [Geomoose-users] TMS layers in GeoMOOSE 3.x
Hello,
Can we add TMS layers to GeoMOOSE 3.x? In the older version of GeoMOOSE I had
used TMS to connect to MapCache. Please let me know if I can access TMS layers
and if I should do something different.
Thank You
GM 2.x code to access TMS:
<map-source name="Picto2020BackgroundTMS" type="tms" projection="EPSG:103749"
tiled="true" width="512" height="512" units="ft" transitionEffect="resize"
tileOrigin="new OpenLayers.LonLat(436450.000000,80000.000000)">
<layer name="LyonPictoPhotos2020"/>
<url>https://linkprotect.cudasvc.com/url?a=https%3a%2f%2fgeomoose.lyonco.org%2flyonmapcache%2ftms%2f&c=E,1,MBcgmZ2Jt746HSIDYM-fYfYiG-drsRR3bix_7Rx1Dj5xJBw7YY6vCuo-UH6mdmq8RfP6X8jM3GWw3oTjYo3H0AAmCd7yzHlzUf68YVnqngoTpr5OEd0Rnw,,&typo=1</url>
<type>"jpg"</type>
</map-source>
Sincerely,
Mark Volz, GISP
_______________________________________________
Geomoose-users mailing list
[email protected]
https://linkprotect.cudasvc.com/url?a=https%3a%2f%2flists.osgeo.org%2fmailman%2flistinfo%2fgeomoose-users&c=E,1,xMh-ls89WpsaYqxsdY3KvqA-_bWEW37TfBWnJy0OYSDMAcfQj6R_iwe1o6DMUoqSaUEfs7vG7wWIa2yntHNe9OcPxKvpoftNT6RBR9QeBwio75O_R6Q8j_b-cA,,&typo=1
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://linkprotect.cudasvc.com/url?a=http%3a%2f%2flists.osgeo.org%2fpipermail%2fgeomoose-users%2fattachments%2f20211217%2fbad87a52%2fattachment.html&c=E,1,EYywdTShGcYCuchQkuucmw9-Yv4smLgxO-l5j4dFy5zWrMpbWRUcVkuhGTNZdW41lDFo_O3Scddg9waB4dr79FGNrnf4zG7UIqUIglbcH0BzSlSD&typo=1>
------------------------------
Subject: Digest Footer
_______________________________________________
Geomoose-users mailing list
[email protected]
https://linkprotect.cudasvc.com/url?a=https%3a%2f%2flists.osgeo.org%2fmailman%2flistinfo%2fgeomoose-users&c=E,1,jTx22kNkZlAEGrHPSGTzdwAGP2yGGknuw6b2oFnkqTqfSsfYrLpMgAWohBKzRP2hb02AQMrYpjOjC2pTZHNZxkxKu7GhMCzrtAXWrYdITo2EmQ6_wwYnZrXMf_bD&typo=1
------------------------------
End of Geomoose-users Digest, Vol 124, Issue 6
**********************************************
_______________________________________________
Geomoose-users mailing list
[email protected]
https://lists.osgeo.org/mailman/listinfo/geomoose-users
