From: [email protected] To: [email protected] Subject: RE: [geonet] Terrain Grid Problem Date: Tue, 29 Dec 2015 01:34:21 +0000
It is very simple. You must create DTM for a litle number of gravity stations and repeat this process until all gravity data will be proces. Don't forget that the terrain correction is for 20 Km around the gravity station Regards From: [email protected] To: [email protected] Subject: [geonet] Terrain Grid Problem Date: Mon, 28 Dec 2015 17:50:04 -0700 Hello, I created a very large terrain correction grid using the gravity module of Geosoft Oasis Montaj. It took over 3 days to create the terrain correction grid. Once it was done, it locked up my computer for another day and I finally had to shut it off. The TC grid is about 250 megs but if I open it in Oasis Montaj, it shows a blank screen. Is there any possibility that this grid may still be usable? If so, what do I need to do to make it show up on the screen. Secondly, every time I create large terrain correction grids, my computer locks up after it completes. What can I do about this? Anything? I often end up having to shut my computer down ungracefully and I do not like doing that. This is not an old machine, it is actually pretty new and powerful. Thank you for your help. Caitlin Bernier-GISPMagee Geophysical Services [email protected] --- Forum archives can be accessed here: http://lyris.geosoft.com/read/?forum=geonet You are currently subscribed to geonet as: [email protected]. To subscribe or unsubscribe from any of our forums, select the User Forum selection on the Geosoft Community page: http://www.geosoft.com/support/community/forums/register/ --- Forum archives can be accessed here: http://lyris.geosoft.com/read/?forum=geonet You are currently subscribed to geonet as: [email protected]. To subscribe or unsubscribe from any of our forums, select the User Forum selection on the Geosoft Community page: http://www.geosoft.com/support/community/forums/register/
