Hi David, Thank you for your suggestion. I will try it on monday. Just for your information, I was not trying to use https for the webserver. The server that I am using for this is under the control of our sysadmin. I have only 3 ports open for this particular server (80, 8080 and 443) and it is not easy to get another port open without causing long discussions. I used the 80 and 8080 so 443 is the only one that I can use for the time being. I will try to get another port open. Regards, Dv
________________________________ From: [email protected] on behalf of David Winslow Sent: Fri 14/01/2011 11:52 PM To: [email protected] Subject: Re: [geonode] Error connecting to GeoNode authentication server:Readtimed out Is your web server really running non-SSL'ed HTTP on port 443? That's a highly unusual configuration in my experience. If you are really intending to use https for these internal requests, you should specify it in the URL: <param-value>https://beta-u.landgate.wa.gov.au:443/ <http://beta-u.landgate.wa.gov.au:443/> </param-value> -- David Winslow OpenGeo - http://opengeo.org/ On Fri, Jan 14, 2011 at 8:34 AM, Ariel Nunez <[email protected]> wrote: Deavi, in about an hour most of the GeoNode devs will log in the #geonode channel in IRC. I suggest you log in there and bring up the issue. If the GEONODE_BASE_URL setting is correct then the next place to look at is the WSGI configuration. Specifically the `WSGIPassAuthorization On` param. After that, can you answer this set of questions: - What url did you set for GeoServer in local_settings.py? - Have you tried to run the same configuration but using port 80? (Running it in https / 443 should not be a problem but it is better to be safe than sorry) Best, Ariel. On Thu, Jan 13, 2011 at 11:12 PM, Deavi Purnomo <[email protected]> wrote: HI Ariel, Thank you for your suggestion. Yes I did. This is the setting: <context-param> <param-name>GEONODE_BASE_URL</param-name> <param-value>http://beta-u.landgate.wa.gov.au:443/</param-value> </context-param> Regards, Deavi -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ariel Nunez Sent: Friday, 14 January 2011 10:08 AM To: [email protected] Subject: Re: [geonode] Error connecting to GeoNode authentication server: Readtimed out Have you configured the GEONODE_BASE_URL setting in Geoserver? If you have, can you check it is looking for the right port? Sent from my iPad On Jan 13, 2011, at 18:57, Deavi Purnomo <[email protected]> wrote: Hi Geonode, I have been trying to install Geonode and managed to install most of the component (I think). This is the geonode website:http://beta-u.landgate.wa.gov.au:443/. It seems to be working apart from a number of things. One of them is I keep getting an issue when I go into the MAPS. The error stated "the server returned an error". I investigated the issue and it seems that the issue is that when the maps was open a request was sent to Geoserver by geonode via proxy: <http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities> http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities < <http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geoserver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities> http://beta-u.landgate.wa.gov.au:443/proxy/?url=http://beta-u.landgate.wa.gov.au/geose rver-geonode-dev/wms?SERVICE=WMS&REQUEST=GetCapabilities> . When I try to run the request, I get back the following error message: "Error connecting to GeoNode authentication server: Read timed out". I tried to see what cause this by looking into the code and tried a number of things to resolve the problem myself but none of them works. Could someone please help me? Thank you. Regards, Dv ------------------------------------------------------------------- Deavi Purnomo Manager - Geospatial Consultancy Services Commercial Services and Consultancy Office: +61 (8) 9273 0786 Mobile: +61 421 908 908 email: <mailto:[email protected]> [email protected] website: http://www.landgate.wa.gov.au <http://www.landgate.wa.gov.au/corporate.nsf/82289d1c922cd5eec82573620022343a/f72483272acf8441c825749d0026c3e7?OpenDocument&Highlight=2,international> ------------------------------------------------------------------- This e-mail and any files transmitted with it are intended only for the use of the addressee(s). It may contain information that is confidential and privileged, in which case neither is intended to be waived or lost by mistaken delivery to you. If you are not an intended recipient, any use, interference with, disclosure, distribution or copying of this material is unauthorised and prohibited. If you receive this e-mail in error, please notify the sender by return e-mail and delete the message and any attachments from your system. Unless specifically indicated, this e-mail does not constitute formal advice or commitment by the sender or the Western Australian Land Information Authority (Landgate). Information in this message not relating to the official business of Landgate shall be understood as neither given nor endorsed by it. It is your responsibility to check any attachments for viruses and defects before opening or sending them on. Landgate's liability is limited to r e-supplying affected attachments.
<<winmail.dat>>
