Looking at PrecisionReducer::reducePrecision, it seems like it should perhaps have a little extra logic so that each dimension of the input are handled separately. Underlying the op is just
OverlayNG ov(geom, nullptr, gf.get(), OverlayNG::UNION); So doing that a dimension at a time for any heterogeneous collection makes sense, IMO. P. > On Nov 28, 2020, at 6:33 PM, Andrew Hershberger > <andrew.d.hershber...@gmail.com> wrote: > > Hi al > > 2) GeometryConvertible_GEOSTests.testBufferAllTypes() > > This test is intended to be a sort of stress-test to make sure that all the > types of geometry on which GEOSwift allows you to invoke buffer(by:) (wrapper > around the CAPI's GEOSBuffer_r) can actually be buffered. In geos 3.8.1, all > the sample geometries were able to be buffered without any issues. > > Here's what we get for one of the test cases with 3.9.0beta1: > > Input: > > GeometryCollection( > geometries: [ > GeometryCollection( > geometries: [ > Point(x: 1.0, y: 2.0), > MultiPoint( > points: [ > Point(x: 1.0, y: 2.0), > Point(x: 3.0, y: 4.0) > ] > ), > LineString( > points: [ > Point(x: 1.0, y: 2.0), > Point(x: 3.0, y: 4.0) > ] > ), > MultiLineString( > lineStrings: [ > LineString( > points: [ > Point(x: 1.0, y: 2.0), > Point(x: 3.0, y: 4.0) > ] > ), > LineString( > points: [ > Point(x: 5.0, y: 6.0), > Point(x: 7.0, y: 8.0) > ] > ) > ] > ), > Polygon( > exterior: LinearRing( > points: [ > Point(x: 2.0, y: 2.0), > Point(x: -2.0, y: 2.0), > Point(x: -2.0, y: -2.0), > Point(x: 2.0, y: -2.0), > Point(x: 2.0, y: 2.0) > ] > ), > holes: [ > LinearRing( > points: [ > Point(x: 1.0, y: 1.0), > Point(x: 1.0, y: -1.0), > Point(x: -1.0, y: -1.0), > Point(x: -1.0, y: 1.0), > Point(x: 1.0, y: 1.0) > ] > ) > ] > ), > MultiPolygon( > polygons: [ > Polygon( > exterior: LinearRing( > points: [ > Point(x: 2.0, y: 2.0), > Point(x: -2.0, y: 2.0), > Point(x: -2.0, y: -2.0), > Point(x: 2.0, y: -2.0), > Point(x: 2.0, y: 2.0) > ] > ), > holes: [ > LinearRing( > points: [ > Point(x: 1.0, y: 1.0), > Point(x: 1.0, y: -1.0), > Point(x: -1.0, y: -1.0), > Point(x: -1.0, y: 1.0), > Point(x: 1.0, y: 1.0) > ] > ) > ] > ), > Polygon( > exterior: LinearRing( > points: [ > Point(x: 7.0, y: 2.0), > Point(x: 3.0, y: 2.0), > Point(x: 3.0, y: -2.0), > Point(x: 7.0, y: -2.0), > Point(x: 7.0, y: 2.0) > ] > ), > holes: [] > ) > ] > ) > ] > ) > ] > ) > > buffer(by: 0.5) > > errorMessage: "IllegalArgumentException: Overlay input is mixed-dimension" > > The exception is being thrown from EdgeNodingBuilder.cpp:195. > > In frame #2, i = 0 > > In frame #0, i = 0 > > This suggests to me that it's checking the dimension of the Point inside of > the child GeometryCollection inside of the parent GeometryCollection. > > g->getDimension() is returning 0 (geos::geom::Dimension::DimensionType P) and > expectedDim is 2. > > Here's a relevant stack trace: > > #0 > geos::operation::overlayng::EdgeNodingBuilder::addGeometryCollection(geos::geom::GeometryCollection > const*, int, int) at geos/src/operation/overlayng/EdgeNodingBuilder.cpp:195 > #1 geos::operation::overlayng::EdgeNodingBuilder::add(geos::geom::Geometry > const*, int) at geos/src/operation/overlayng/EdgeNodingBuilder.cpp:169 > #2 > geos::operation::overlayng::EdgeNodingBuilder::addGeometryCollection(geos::geom::GeometryCollection > const*, int, int) at geos/src/operation/overlayng/EdgeNodingBuilder.cpp:197 > #3 geos::operation::overlayng::EdgeNodingBuilder::add(geos::geom::Geometry > const*, int) at geos/src/operation/overlayng/EdgeNodingBuilder.cpp:169 > #4 geos::operation::overlayng::EdgeNodingBuilder::build(geos::geom::Geometry > const*, geos::geom::Geometry const*) at > geos/src/operation/overlayng/EdgeNodingBuilder.cpp:82 > #5 geos::operation::overlayng::OverlayNG::computeEdgeOverlay() at > geos/src/operation/overlayng/OverlayNG.cpp:222 > #6 geos::operation::overlayng::OverlayNG::getResult() at > geos/src/operation/overlayng/OverlayNG.cpp:179 > #7 > geos::operation::overlayng::PrecisionReducer::reducePrecision(geos::geom::Geometry > const*, geos::geom::PrecisionModel const*, bool) at > geos/src/operation/overlayng/PrecisionReducer.cpp:46 > #8 geos::precision::GeometryPrecisionReducer::reduce(geos::geom::Geometry > const&) at geos/src/precision/GeometryPrecisionReducer.cpp:60 > #9 geos::precision::GeometryPrecisionReducer::reduce(geos::geom::Geometry > const&, geos::geom::PrecisionModel const&) at > geos/include/geos/precision/GeometryPrecisionReducer.h:102 > #10 > geos::operation::buffer::BufferOp::bufferFixedPrecision(geos::geom::PrecisionModel > const&) at geos/src/operation/buffer/BufferOp.cpp:263 > #11 geos::operation::buffer::BufferOp::bufferReducedPrecision(int) at > geos/src/operation/buffer/BufferOp.cpp:218 > #12 geos::operation::buffer::BufferOp::bufferReducedPrecision() at > geos/src/operation/buffer/BufferOp.cpp:168 > #13 geos::operation::buffer::BufferOp::computeGeometry() at > geos/src/operation/buffer/BufferOp.cpp:150 > #14 geos::operation::buffer::BufferOp::getResultGeometry(double) at > geos/src/operation/buffer/BufferOp.cpp:122 > #15 geos::operation::buffer::BufferOp::bufferOp(geos::geom::Geometry const*, > double, int, int) at geos/src/operation/buffer/BufferOp.cpp:114 > #16 geos::geom::Geometry::buffer(double, int) const at > geos/src/geom/Geometry.cpp:509 > #17 GEOSBuffer_r::$_41::operator()() const at geos/capi/geos_ts_c.cpp:1078 > #18 > _Z7executeIZ12GEOSBuffer_rE4$_41LDn0EEDTclfp0_EEP20GEOSContextHandle_HSOT_ at > geos/capi/geos_ts_c.cpp:388 > #19 ::GEOSBuffer_r(GEOSContextHandle_t, const geos::geom::Geometry *, double, > int) at geos/capi/geos_ts_c.cpp:1077 > #20 GeometryConvertible.buffer(by:) at > GEOSwift/GEOSwift/GEOS/GeometryConvertible+GEOS.swift:348 > #21 GeometryConvertible_GEOSTests.testBufferAllTypes() at > GEOSwift/GEOSwiftTests/GEOS/GeometryConvertible+GEOSTests.swift:856 > > Let me know what other info I can provide. > > -- > Andrew > _______________________________________________ > geos-devel mailing list > geos-devel@lists.osgeo.org > https://lists.osgeo.org/mailman/listinfo/geos-devel _______________________________________________ geos-devel mailing list geos-devel@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/geos-devel
