Thanks for fixing everything Torben.
Could we change that to geoserver-master-docs and git it to watch a section
of the git repo? And remove the doc build from geoserver-master ... this
would allow doc fixes to deploy faster.
And not trigger a full build when only the docs change.
--
Jody Garnett
On 12 July 2016 at 15:34, Torben Barsballe <[email protected]>
wrote:
> The jenkins builds have finished, and the docs appear to be getting
> updated correctly now.
>
> I have also added a "geoserver-master-nightly-docs" task, that builds and
> deploys the master docs nightly, such that we can build & deploy docs
> seperately from the rest of geoserver. I can add equivalent builds for
> 2.9.x and 2.8.x as needed.
>
> Torben
>
> On Tue, Jul 12, 2016 at 2:28 PM, Torben Barsballe <
> [email protected]> wrote:
>
>> Most likely updating the git plugin slightly changed the behavior of the
>> ${GIT_BRANCH} macro, appending origin/.
>> Assuming the timeline fits, that would explain why this started
>> happenting.
>>
>> Thanks,
>>
>> Torben
>>
>> On Tue, Jul 12, 2016 at 2:23 PM, Christian Del Pino <
>> [email protected]> wrote:
>>
>>> Hi Torben,
>>>
>>> A plugin was installed recently to for the Geogig team. Build
>>> Reports/jacoco.
>>>
>>> The git plugin was updated, per request, not too long ago. Not sure if
>>> any of these would cause the issue at hand?
>>>
>>> Regards,
>>> Chris
>>>
>>> On Tue, Jul 12, 2016 at 5:09 PM, Torben Barsballe <
>>> [email protected]> wrote:
>>>
>>>> I took a stab at this. Looking at a build from Jun 28 we have:
>>>> ...
>>>>
>>>> [geoserver-master] $ /bin/sh -xe /tmp/hudson6430242953085261747.sh
>>>> + VER=master
>>>> + BASE=/var/www/geoserver/master/doc/en
>>>> + [ -e /var/www/geoserver/master/doc/en ]
>>>> + cd doc/en/user
>>>> + make clean html
>>>> rm -rf build/*
>>>> mkdir -p build/html build/doctrees
>>>> sphinx-build -b html -d build/doctrees source build/html
>>>>
>>>> ...
>>>>
>>>> A build from Jun 30 has:
>>>>
>>>> ...
>>>>
>>>> [geoserver-master] $ /bin/sh -xe /tmp/hudson1759667221082312760.sh
>>>> + VER=origin/master
>>>> + BASE=/var/www/geoserver/origin/master/doc/en
>>>> + [ -e /var/www/geoserver/origin/master/doc/en ]
>>>> + cd doc/en/user
>>>> + make clean html
>>>> rm -rf build/*
>>>> mkdir -p build/html build/doctrees
>>>> sphinx-build -b html -d build/doctrees source build/html
>>>>
>>>> ...
>>>>
>>>> So (as Ben surmised) it appears that we are getting the wrong value for
>>>> VER - origin/master instead of master
>>>> VER is being populated from GIT_BRANCH, which appears to come from the
>>>> Jenkins Git plugin.
>>>>
>>>>
>>>> I am not sure why this behvior has changed.
>>>> Chris - is it possible there were some updates to the ares jenkins
>>>> recently?
>>>>
>>>> I have found a workaround here:
>>>> http://stackoverflow.com/questions/20541609/how-to-receive-local-git-branch-name-with-jenkins-git-plugin
>>>> and am applying it the ares builds. I will see if this fix works shortly.
>>>>
>>>> Andrea - the doc redirects are configured on docs.geoserver.org - see
>>>> step 7 of
>>>> http://docs.geoserver.org/latest/en/developer/release-guide/index.html#post-the-documentation
>>>> Basically, a proxy is used to map stable, maintenance, latest, etc. to
>>>> specific locations on ares.
>>>>
>>>>
>>>> Torben
>>>>
>>>>
>>>>
>>>> On Sat, Jul 9, 2016 at 2:27 AM, Ian Turton <[email protected]> wrote:
>>>>
>>>>> This page on master (
>>>>> http://docs.geoserver.org/latest/en/user/data/database/primarykey.html)
>>>>> should have changed on June 30th (
>>>>> https://github.com/geoserver/geoserver/commit/f424dd342cf3931bf293471e84a58ed410872304).
>>>>> While yesterday's change to the GeoTools docs has gone out fine (
>>>>> http://docs.geotools.org/latest/userguide/library/render/faq.html)
>>>>>
>>>>> Ian
>>>>>
>>>>> On 9 July 2016 at 09:47, Andrea Aime <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> That's easy enough to check, just look at the build logs...
>>>>>>
>>>>>> On master:
>>>>>> Build finished. The HTML pages are in build/html.
>>>>>> + rm -rf /var/www/geoserver/origin/master/doc/en/user
>>>>>> + cp -r build/html /var/www/geoserver/origin/master/doc/en/user
>>>>>>
>>>>>> On 2.9.x
>>>>>> Build finished. The HTML pages are in build/html.
>>>>>> + rm -rf /var/www/geoserver/origin/2.9.x/doc/en/user
>>>>>> + cp -r build/html /var/www/geoserver/origin/2.9.x/doc/en/user
>>>>>>
>>>>>> So... not in the build itself. I still don't understand how these
>>>>>> paths end up being mapped on docs.geoserver.org though,
>>>>>> getting to know that might help clarify the situation.
>>>>>>
>>>>>> Speaking of which... at the bottom of our documentation pages for
>>>>>> master and 2.9.x on docs.geoserver.org it says:
>>>>>>
>>>>>> © Copyright 2016, Open Source Geospatial Foundation. License Creative
>>>>>> Commons Attribution. *Last updated on Jun 28, 2016*. Created using
>>>>>> Sphinx.
>>>>>> © Copyright 2016, Open Source Geospatial Foundation. License Creative
>>>>>> Commons Attribution. *Last updated on Jun 27, 2016*. Created using
>>>>>> Sphinx.
>>>>>>
>>>>>> Seems like whatever was copying the documentation from the build
>>>>>> output to docs.geoserver.org is not working anymore.
>>>>>> Indeed if you go here (damn slow, but working if you're patient)
>>>>>> you'll get the latest master build instead (looked at the path where the
>>>>>> docs
>>>>>> are copied and figured out where they are exposed by apache):
>>>>>>
>>>>>> http://ares.boundlessgeo.com/geoserver/origin/master/doc/en/user/
>>>>>>
>>>>>> Cheers
>>>>>> Andrea
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sat, Jul 9, 2016 at 12:53 AM, Jody Garnett <[email protected]
>>>>>> > wrote:
>>>>>>
>>>>>>> Maybe we have both master and 2.9.x copying to the same place?
>>>>>>>
>>>>>>> On Thu, Jul 7, 2016 at 10:16 AM Andrea Aime <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> On Wed, Jul 6, 2016 at 9:59 PM, Jody Garnett <
>>>>>>>> [email protected]> wrote:
>>>>>>>>
>>>>>>>>> Looking at build 2600/consoleFull
>>>>>>>>> <http://ares.boundlessgeo.com/jenkins/view/geoserver/job/geoserver-master/2600/consoleFull>
>>>>>>>>> :
>>>>>>>>>
>>>>>>>>> Build finished. The HTML pages are in build/html.
>>>>>>>>> + rm -rf /var/www/geoserver/origin/master/doc/en/user
>>>>>>>>> + cp -r build/html /var/www/geoserver/origin/master/doc/en/user
>>>>>>>>>
>>>>>>>>> Build finished. The HTML pages are in build/html.
>>>>>>>>> + rm -rf /var/www/geoserver/origin/master/doc/en/developer
>>>>>>>>> + cp -r build/html
>>>>>>>>> //var/www/geoserver/origin/master/doc/en/developer
>>>>>>>>>
>>>>>>>>> Build finished. The HTML pages are in build/html.
>>>>>>>>> + rm -rf /var/www/geoserver/origin/master/doc/en/docguide
>>>>>>>>> + cp -r build/html /var/www/geoserver/origin/master/doc/en/docguide
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Other than the developer guide having "//" I do not see anything
>>>>>>>>> wrong...
>>>>>>>>>
>>>>>>>>
>>>>>>>> The copy sort of assumes ares and docs are the same box though...
>>>>>>>> or not?
>>>>>>>> Are they? If not, how are the files supposed to get on docs?
>>>>>>>> Also the paths do not seem to match, the documentation on docs is
>>>>>>>> at:
>>>>>>>>
>>>>>>>> http://docs.geoserver.org/latest/en/user/
>>>>>>>>
>>>>>>>> while the path the stuff is being copied to is master/doc/en/user
>>>>>>>>
>>>>>>>> Cheers
>>>>>>>> Andrea
>>>>>>>>
>>>>>>>> --
>>>>>>>> ==
>>>>>>>> GeoServer Professional Services from the experts! Visit
>>>>>>>> http://goo.gl/it488V for more information.
>>>>>>>> ==
>>>>>>>>
>>>>>>>> Ing. Andrea Aime
>>>>>>>> @geowolf
>>>>>>>> Technical Lead
>>>>>>>>
>>>>>>>> GeoSolutions S.A.S.
>>>>>>>> Via di Montramito 3/A
>>>>>>>> 55054 Massarosa (LU)
>>>>>>>> phone: +39 0584 962313
>>>>>>>> fax: +39 0584 1660272
>>>>>>>> mob: +39 339 8844549
>>>>>>>>
>>>>>>>> http://www.geo-solutions.it
>>>>>>>> http://twitter.com/geosolutions_it
>>>>>>>>
>>>>>>>> *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
>>>>>>>>
>>>>>>>> Le informazioni contenute in questo messaggio di posta elettronica
>>>>>>>> e/o nel/i file/s allegato/i sono da considerarsi strettamente
>>>>>>>> riservate. Il
>>>>>>>> loro utilizzo è consentito esclusivamente al destinatario del
>>>>>>>> messaggio,
>>>>>>>> per le finalità indicate nel messaggio stesso. Qualora riceviate questo
>>>>>>>> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
>>>>>>>> darcene notizia via e-mail e di procedere alla distruzione del
>>>>>>>> messaggio
>>>>>>>> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio
>>>>>>>> stesso,
>>>>>>>> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
>>>>>>>> utilizzarlo per finalità diverse, costituisce comportamento contrario
>>>>>>>> ai
>>>>>>>> principi dettati dal D.Lgs. 196/2003.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> The information in this message and/or attachments, is intended
>>>>>>>> solely for the attention and use of the named addressee(s) and may be
>>>>>>>> confidential or proprietary in nature or covered by the provisions of
>>>>>>>> privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New
>>>>>>>> Data
>>>>>>>> Protection Code).Any use not in accord with its purpose, any
>>>>>>>> disclosure,
>>>>>>>> reproduction, copying, distribution, or either dissemination, either
>>>>>>>> whole
>>>>>>>> or partial, is strictly forbidden except previous formal approval of
>>>>>>>> the
>>>>>>>> named addressee(s). If you are not the intended recipient, please
>>>>>>>> contact
>>>>>>>> immediately the sender by telephone, fax or e-mail and delete the
>>>>>>>> information in this message that has been received in error. The sender
>>>>>>>> does not give any warranty or accept liability as the content,
>>>>>>>> accuracy or
>>>>>>>> completeness of sent messages and accepts no responsibility for
>>>>>>>> changes
>>>>>>>> made after they were sent or for other risks which arise as a result of
>>>>>>>> e-mail transmission, viruses, etc.
>>>>>>>>
>>>>>>>> -------------------------------------------------------
>>>>>>>>
>>>>>>> --
>>>>>>> --
>>>>>>> Jody Garnett
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> ==
>>>>>> GeoServer Professional Services from the experts! Visit
>>>>>> http://goo.gl/it488V for more information.
>>>>>> ==
>>>>>>
>>>>>> Ing. Andrea Aime
>>>>>> @geowolf
>>>>>> Technical Lead
>>>>>>
>>>>>> GeoSolutions S.A.S.
>>>>>> Via di Montramito 3/A
>>>>>> 55054 Massarosa (LU)
>>>>>> phone: +39 0584 962313
>>>>>> fax: +39 0584 1660272
>>>>>> mob: +39 339 8844549
>>>>>>
>>>>>> http://www.geo-solutions.it
>>>>>> http://twitter.com/geosolutions_it
>>>>>>
>>>>>> *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
>>>>>>
>>>>>> Le informazioni contenute in questo messaggio di posta elettronica
>>>>>> e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate.
>>>>>> Il
>>>>>> loro utilizzo è consentito esclusivamente al destinatario del messaggio,
>>>>>> per le finalità indicate nel messaggio stesso. Qualora riceviate questo
>>>>>> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
>>>>>> darcene notizia via e-mail e di procedere alla distruzione del messaggio
>>>>>> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
>>>>>> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
>>>>>> utilizzarlo per finalità diverse, costituisce comportamento contrario ai
>>>>>> principi dettati dal D.Lgs. 196/2003.
>>>>>>
>>>>>>
>>>>>>
>>>>>> The information in this message and/or attachments, is intended
>>>>>> solely for the attention and use of the named addressee(s) and may be
>>>>>> confidential or proprietary in nature or covered by the provisions of
>>>>>> privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data
>>>>>> Protection Code).Any use not in accord with its purpose, any disclosure,
>>>>>> reproduction, copying, distribution, or either dissemination, either
>>>>>> whole
>>>>>> or partial, is strictly forbidden except previous formal approval of the
>>>>>> named addressee(s). If you are not the intended recipient, please contact
>>>>>> immediately the sender by telephone, fax or e-mail and delete the
>>>>>> information in this message that has been received in error. The sender
>>>>>> does not give any warranty or accept liability as the content, accuracy
>>>>>> or
>>>>>> completeness of sent messages and accepts no responsibility for changes
>>>>>> made after they were sent or for other risks which arise as a result of
>>>>>> e-mail transmission, viruses, etc.
>>>>>>
>>>>>> -------------------------------------------------------
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------------------------
>>>>>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in
>>>>>> San
>>>>>> Francisco, CA to explore cutting-edge tech and listen to tech
>>>>>> luminaries
>>>>>> present their vision of the future. This family event has something
>>>>>> for
>>>>>> everyone, including kids. Get more information and register today.
>>>>>> http://sdm.link/attshape
>>>>>> _______________________________________________
>>>>>> Geoserver-devel mailing list
>>>>>> [email protected]
>>>>>> https://lists.sourceforge.net/lists/listinfo/geoserver-devel
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Ian Turton
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
>>>>> Francisco, CA to explore cutting-edge tech and listen to tech
>>>>> luminaries
>>>>> present their vision of the future. This family event has something for
>>>>> everyone, including kids. Get more information and register today.
>>>>> http://sdm.link/attshape
>>>>> _______________________________________________
>>>>> Geoserver-devel mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/geoserver-devel
>>>>>
>>>>>
>>>>
>>>
>>>
>>> --
>>> Christian Del Pino
>>> DevOps Engineer
>>> Boundless | www.boundlessgeo.com
>>> Email: [email protected]
>>>
>>
>>
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> patterns at an interface-level. Reveals which users, apps, and protocols
> are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning
> reports.http://sdm.link/zohodev2dev
> _______________________________________________
> Geoserver-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/geoserver-devel
>
>
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
Geoserver-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-devel
