Hi Richard,
I think that the problem is in how GDAL produces overviews with palettes:
https://lists.osgeo.org/pipermail/gdal-dev/2016-November/045589.html
The different behavior between QGIS and GeoServer is due to this:
QGIS (based on GDAL) uses the palette of the main image whilst some other
readers, as an instance, the JAVA TiffReader used by GeoServer, uses
overview's specific palette.
I'm also going to ask if there is any news on that on GDAL.
Hope this helps.
Regards,
Daniele
As further references:
------------------------------
https://trac.osgeo.org/gdal/ticket/2213
https://lists.osgeo.org/pipermail/gdal-dev/2016-November/045590.html
https://github.com/geosolutions-it/imageio-ext/issues/122
On Thu, Mar 8, 2018 at 2:37 PM, Richard Duivenvoorde <rdmaili...@duif.net>
wrote:
> Hi All,
>
> We have some Geotiff rasters with small lines (cables) on it.
> Serving these transparent with Geoserver is fine, using
> InputTransparentColor set to #ffffff.
>
> But adding pyramids/overviews to it, the lines look better in QGIS, so
> we added the pyramids using gdaladdo.
>
> While that works for QGIS, for Geoserver (2.12.0) it looks as if the
> InputTransparentColor in the overviews is NOT used?
>
> The map is not transparent anymore, untill you zoom in at the base
> level, THEN the map will be transparent again.
>
> Using default raster sld.
>
> Anybody a clue?
>
> Regards,
>
> Richard Duivenvoorde
>
> PS:
>
> Gdalinfo for the original tiff (without pyramids):
>
> Driver: GTiff/GeoTIFF
> Files: WATER.tif
> Size is 13422, 20898
> Coordinate System is:
> PROJCS["Amersfoort / RD New",
> GEOGCS["Amersfoort",
> DATUM["Amersfoort",
> SPHEROID["Bessel 1841",6377397.155,299.1528128,
> AUTHORITY["EPSG","7004"]],
>
> TOWGS84[565.2369,50.0087,465.658,-0.406857,0.350733,-1.87035,4.0812],
> AUTHORITY["EPSG","6289"]],
> PRIMEM["Greenwich",0,
> AUTHORITY["EPSG","8901"]],
> UNIT["degree",0.0174532925199433,
> AUTHORITY["EPSG","9122"]],
> AUTHORITY["EPSG","4289"]],
> PROJECTION["Oblique_Stereographic"],
> PARAMETER["latitude_of_origin",52.15616055555555],
> PARAMETER["central_meridian",5.38763888888889],
> PARAMETER["scale_factor",0.9999079],
> PARAMETER["false_easting",155000],
> PARAMETER["false_northing",463000],
> UNIT["metre",1,
> AUTHORITY["EPSG","9001"]],
> AXIS["X",EAST],
> AXIS["Y",NORTH],
> AUTHORITY["EPSG","28992"]]
> Origin = (132801.000000000000000,452878.000000000000000)
> Pixel Size = (0.333333300000000,-0.333333300000000)
> Metadata:
> AREA_OR_POINT=Area
> Image Structure Metadata:
> COMPRESSION=LZW
> INTERLEAVE=BAND
> Corner Coordinates:
> Upper Left ( 132801.000, 452878.000) ( 5d 3'49.93"E, 52d 3'53.02"N)
> Lower Left ( 132801.000, 445912.001) ( 5d 3'51.56"E, 52d 0' 7.60"N)
> Upper Right ( 137275.000, 452878.000) ( 5d 7'44.84"E, 52d 3'53.60"N)
> Lower Right ( 137275.000, 445912.001) ( 5d 7'46.14"E, 52d 0' 8.18"N)
> Center ( 135038.000, 449395.000) ( 5d 5'48.11"E, 52d 2' 0.62"N)
> Band 1 Block=13422x1 Type=Byte, ColorInterp=Palette
> NoData Value=0
> Color Table (RGB with 256 entries)
> 0: 255,255,255,0
> 1: 0,0,255,255
> 2: 0,0,0,255
> 3: 0,0,0,255
> 4: 0,0,0,255
> 5: 0,0,0,255
> 6: 0,0,0,255
> 7: 0,0,0,255
> 8: 0,0,0,255
> 9: 0,0,0,255
> 10: 0,0,0,255
> etc....
>
> Gdalinfo for the tiff with pyramids:
>
> Driver: GTiff/GeoTIFF
> Files: WATER.tif
> Size is 13422, 20898
> Coordinate System is:
> PROJCS["Amersfoort / RD New",
> GEOGCS["Amersfoort",
> DATUM["Amersfoort",
> SPHEROID["Bessel 1841",6377397.155,299.1528128,
> AUTHORITY["EPSG","7004"]],
>
> TOWGS84[565.2369,50.0087,465.658,-0.406857,0.350733,-1.87035,4.0812],
> AUTHORITY["EPSG","6289"]],
> PRIMEM["Greenwich",0,
> AUTHORITY["EPSG","8901"]],
> UNIT["degree",0.0174532925199433,
> AUTHORITY["EPSG","9122"]],
> AUTHORITY["EPSG","4289"]],
> PROJECTION["Oblique_Stereographic"],
> PARAMETER["latitude_of_origin",52.15616055555555],
> PARAMETER["central_meridian",5.38763888888889],
> PARAMETER["scale_factor",0.9999079],
> PARAMETER["false_easting",155000],
> PARAMETER["false_northing",463000],
> UNIT["metre",1,
> AUTHORITY["EPSG","9001"]],
> AXIS["X",EAST],
> AXIS["Y",NORTH],
> AUTHORITY["EPSG","28992"]]
> Origin = (132801.000000000000000,452878.000000000000000)
> Pixel Size = (0.333333300000000,-0.333333300000000)
> Metadata:
> AREA_OR_POINT=Area
> Image Structure Metadata:
> COMPRESSION=LZW
> INTERLEAVE=BAND
> Corner Coordinates:
> Upper Left ( 132801.000, 452878.000) ( 5d 3'49.93"E, 52d 3'53.02"N)
> Lower Left ( 132801.000, 445912.001) ( 5d 3'51.56"E, 52d 0' 7.60"N)
> Upper Right ( 137275.000, 452878.000) ( 5d 7'44.84"E, 52d 3'53.60"N)
> Lower Right ( 137275.000, 445912.001) ( 5d 7'46.14"E, 52d 0' 8.18"N)
> Center ( 135038.000, 449395.000) ( 5d 5'48.11"E, 52d 2' 0.62"N)
> Band 1 Block=13422x1 Type=Byte, ColorInterp=Palette
> NoData Value=0
> Overviews: 6711x10449, 3356x5225, 1678x2613, 839x1307, 420x654,
> 210x327, 105x164, 53x82
> Color Table (RGB with 256 entries)
> 0: 255,255,255,0
> 1: 0,0,255,255
> 2: 0,0,0,255
> 3: 0,0,0,255
> 4: 0,0,0,255
> 5: 0,0,0,255
> 6: 0,0,0,255
> 7: 0,0,0,255
> 8: 0,0,0,255
> 9: 0,0,0,255
> 10: 0,0,0,255
> etc...
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Geoserver-devel mailing list
> Geoserver-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/geoserver-devel
>
--
Regards,
Daniele Romagnoli
==
GeoServer Professional Services from the experts! Visit http://goo.gl/it488V
for more information.
==
Ing. Daniele Romagnoli
Senior Software Engineer
GeoSolutions S.A.S.
Via di Montramito 3/A
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
loro utilizzo è consentito esclusivamente al destinatario del messaggio,
per le finalità indicate nel messaggio stesso. Qualora riceviate questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla distruzione del messaggio
stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
utilizzarlo per finalità diverse, costituisce comportamento contrario ai
principi dettati dal D.Lgs. 196/2003.
The information in this message and/or attachments, is intended solely for
the attention and use of the named addressee(s) and may be confidential or
proprietary in nature or covered by the provisions of privacy act
(Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
Code).Any use not in accord with its purpose, any disclosure, reproduction,
copying, distribution, or either dissemination, either whole or partial, is
strictly forbidden except previous formal approval of the named
addressee(s). If you are not the intended recipient, please contact
immediately the sender by telephone, fax or e-mail and delete the
information in this message that has been received in error. The sender
does not give any warranty or accept liability as the content, accuracy or
completeness of sent messages and accepts no responsibility for changes
made after they were sent or for other risks which arise as a result of
e-mail transmission, viruses, etc.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Geoserver-devel mailing list
Geoserver-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-devel
