We discussed pushing both meetings ahead one hour in today's meeting and
everyone was in favour.

For those who weren't present: *Any objections to moving all future PMC
meetings to 17:00 UTC?*:

https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting&year=2019&month=01&day=08&hour=17&min=00&sec=0&ah=1
<https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting&year=2018&month=12&day=11&hour=16&min=00&sec=0&ah=1>

Cheers,
Torben


On Tue, Dec 11, 2018 at 7:56 AM Torben Barsballe <
[email protected]> wrote:

> I'd say 16:00, to match the other meeting (Although 16:30 would be fine by
> me too).
>
> Torben
>
> On Tue, Dec 11, 2018 at 12:45 AM Ian Turton <[email protected]> wrote:
>
>> Without wishing to confuse matters any more do we mean 16:00 or 16:30
>> (like the other meeting)?
>>
>> Either way works for me,
>>
>> Ian
>>
>> On Mon, 10 Dec 2018 at 23:16, Torben Barsballe <
>> [email protected]> wrote:
>>
>>> Sounds good.
>>>
>>> In that case, lets have tomorrows PMC meeting at 16:00 UTC:
>>>
>>>
>>> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting&year=2018&month=12&day=11&hour=16&min=00&sec=0&ah=1
>>>
>>> On Mon, Dec 10, 2018 at 3:07 PM <[email protected]> wrote:
>>>
>>>> Even if I could occasionally make 0630 (which will revert to 0530 once
>>>> daylight savings ends here), I’m not really awake enough to contribute
>>>> much. So optimise for those doing most of the work (hence needing most of
>>>> the coordination), and I’ll do what I can to match that if I’m travelling.
>>>>
>>>>
>>>>
>>>> Brad
>>>>
>>>>
>>>>
>>>> *From:* Andrea Aime <[email protected]>
>>>> *Sent:* Tuesday, 11 December 2018 4:52 AM
>>>> *To:* Torben Barsballe <[email protected]>
>>>> *Cc:* Geoserver-devel <[email protected]>;
>>>> Geotools-Devel list <[email protected]>
>>>> *Subject:* Re: [Geoserver-devel] Reminder: GeoTools/GeoServer meeting
>>>> at 19:30 UTC tomorrow
>>>>
>>>>
>>>>
>>>> On Mon, Dec 10, 2018 at 6:41 PM Torben Barsballe <
>>>> [email protected]> wrote:
>>>>
>>>>
>>>> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting&year=2016&month=11&day=29&hour=19&min=30&sec=0&ah=1
>>>>
>>>>
>>>>
>>>> (There's been some discussion about moving this meeting to the earlier
>>>> 16:00 UTC timeslot, but no real consensus as of yet... assuming this is
>>>> unchanged for now).
>>>>
>>>>
>>>>
>>>> I'd like to hear from Brad if he's going to participate, given that
>>>> 19:30 UTC seems to correspond to 6:30AM his time :-)
>>>>
>>>> I'm all for keeping the meetings open to as many as possible, as long
>>>> as the opportunity is actually used :-)
>>>>
>>>>
>>>>
>>>> Cheers
>>>>
>>>> Andrea
>>>>
>>>>
>>>>
>>>> ==
>>>>
>>>> GeoServer Professional Services from the experts! Visit
>>>> http://goo.gl/it488V for more information. == Ing. Andrea Aime
>>>> @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054
>>>> Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339
>>>> 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it
>>>> ------------------------------------------------------- *Con
>>>> riferimento alla normativa sul trattamento dei dati personali (Reg. UE
>>>> 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si
>>>> precisa che ogni circostanza inerente alla presente email (il suo
>>>> contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è
>>>> riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il
>>>> messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra
>>>> operazione è illecita. Le sarei comunque grato se potesse darmene notizia.
>>>> This email is intended only for the person or entity to which it is
>>>> addressed and may contain information that is privileged, confidential or
>>>> otherwise protected from disclosure. We remind that - as provided by
>>>> European Regulation 2016/679 “GDPR” - copying, dissemination or use of this
>>>> e-mail or the information herein by anyone other than the intended
>>>> recipient is prohibited. If you have received this email by mistake, please
>>>> notify us immediately by telephone or e-mail.*
>>>>
>>> _______________________________________________
>>> GeoTools-Devel mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/geotools-devel
>>>
>>
>>
>> --
>> Ian Turton
>>
>
_______________________________________________
Geoserver-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-devel

Reply via email to