Thank Frederick, that¹s a wonderful writeup.
Will see if that works for us.
Martin
On 26/05/11 5:49 PM, "Frederick Löbig" <[email protected]> wrote:
> Hey, no problem:
>
> I don't know if it is essential to have the same layerorder in the layergroup
> as in the SLD-file but in my case, in which it's working, it is.
>
> 1. add the contents of the SLD file as a new style in GeoServer
> 2. assign that style to every layer in the layergroup
> 3. when you send the wms-request make sure to add the sld=... parameter in the
> request url
> (http://192.1......../geoserver/wms?sld=yoursld.sld&style=&request=GetMap...
> (make sure to leave the value of the style parameter empty since this works
> only in combination with a splitted layer parameter)
>
> You don't need to upload your sld file to any other location to use the url in
> the sld prameter. Once you created a new style in geoserver the SLD-file can
> be found in http://192.1...../geoserveer/styles/yourstyle.sld
>
> This is how it worked in my case, I hope this helps...
>
>
> Frederick Löbig
> Röderichstraße 59
> 60489 Frankfurt am Main
> ---
> E:: [email protected]
> P: +49 (0) 69 - 78 99 52 41
> M: +49 (0) 174 - 70 89 296
> ---
> Office:
> euNetworks GmbH
> Ludwig-Landmann-Straße 405
> 60486 Frankfurt am Main
> P: +49 (0) 69 - 90 554 - 532
> E: [email protected]
> S: floebig
>
> This email and any attachments may contain confidential and/or legally
> privileged information. If you are not the intended recipient, please delete
> the email without reading it and notify the sender.
>
>
>
>
>> > Date: Thu, 26 May 2011 09:17:23 +1000
>> > Subject: 1. Re: NamedLayer / FeatureTypeName - Problem in SLD with
>> GeoServer
>> > From: [email protected]
>> > To: [email protected]
>> > CC: [email protected]
>> >
>> > Dear Frederick,
>> > I had the same problem at exactly the same time, and was eagerly looking >>
for
>> > the answers. I did not get them in my digests either :(. Could you please
>> > send around a summary of the solution?
>> >
>> > Thanks,
>> > Martin
>> >
>> >
>> > On 25/05/11 6:26 PM, "[email protected]"
>> > <[email protected]> wrote:
>> >
>>> > >
>>> > > 1. Re: NamedLayer / FeatureTypeName - Problem in SLD with
>>> > > GeoServer
>> >
>> > --
>> > Martin Tomko, PhD.
>> > Senior Project Manager, Information Infrastructure Design, AURIN
>> > Level 5, Architecture Building
>> > University of Melbourne VIC 3010
>> > AUSTRALIA
>> >
>> > T: +61 3 9035 3298
>> > E: [email protected] <mailto:[email protected]>
>> > W: www.aurin.org.au <www.aurin.org.au>
>> >
>> >
>> >
>> >
>
--
Martin Tomko, PhD.
Senior Project Manager, Information Infrastructure Design, AURIN
Level 5, Architecture Building
University of Melbourne VIC 3010
AUSTRALIA
T: +61 3 9035 3298
E: [email protected] <mailto:[email protected]>
W: www.aurin.org.au <www.aurin.org.au>
------------------------------------------------------------------------------
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery,
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now.
http://p.sf.net/sfu/quest-d2dcopy1
_______________________________________________
Geoserver-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-users
