Yep, I remember that from our previous conversation, but didn't know if
displacement was part of SLD 1.0 for non-fills. I guess not. :-)
On 30 January 2013 16:50, Andrea Aime <andrea.a...@geo-solutions.it> wrote:
> On Wed, Jan 30, 2013 at 5:35 PM, Jonathan Moules <
> jonathanmou...@warwickshire.gov.uk> wrote:
>
>> Hi Chris,
>> Well, if the offset is consistently wrong (i.e., always 3 pixels too
>> far left for instance) the SLD spec may allow you to use a "displacement"
>> parameter (you can for fills with SLD 1.1).
>>
>
> Except that we don't support that part of SLD 1.1, since it was not in SLD
> 1.0
>
> Cheers
> Andrea
>
>
> --
> ==
> Our support, Your Success! Visit http://opensdi.geo-solutions.it for more
> information.
> ==
>
> Ing. Andrea Aime
> @geowolf
> Technical Lead
>
> GeoSolutions S.A.S.
> Via Poggio alle Viti 1187
> 55054 Massarosa (LU)
> Italy
> phone: +39 0584 962313
> fax: +39 0584 1660272
> mob: +39 339 8844549
>
> http://www.geo-solutions.it
> http://twitter.com/geosolutions_it
>
> -------------------------------------------------------
>
This transmission is intended for the named addressee(s) only and may contain
sensitive or protectively marked material up to RESTRICTED and should be
handled accordingly. Unless you are the named addressee (or authorised to
receive it for the addressee) you may not copy or use it, or disclose it to
anyone else. If you have received this transmission in error please notify the
sender immediately. All email traffic sent to or from us, including without
limitation all GCSX traffic, may be subject to recording and/or monitoring in
accordance with relevant legislation.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_jan
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
