On Wed, Jul 3, 2013 at 10:00 AM, Jonathan Moules <
[email protected]> wrote:
> Interesting. I've found that "Line with Border" works just fine if you use
> two LineSymbolisers within the same rule. Using separate <FeatureTypeStyle>
> seems over-kill, as that way you also need to set up two rules, two sets of
> filters, etc.
>
You need to use two separate feature type styles to get proper line casing
when lines do intersect.
Try what you have with a road network and you'll get something like this:
http://geoserver.geo-solutions.it/edu/en/_images/nofts.png
which is normally _not_ the output you want
Cheers
Andrea
--
==
Our support, Your Success! Visit http://opensdi.geo-solutions.it for more
information.
==
Ing. Andrea Aime
@geowolf
Technical Lead
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
mob: +39 339 8844549
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Geoserver-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-users
